Lexus CT 2014 Owner's Manual
![Lexus CT 2014 Electric Car manual cover](/images/hPsATRVtwuiUJWqWUnvfoMdB/thumbs/thumb175x175.webp)
To reset the maintenance light on a Lexus CT 2014, turn the ignition to the "ON" position without starting the engine. Press the trip meter reset button until the odometer reads "ODO." Turn the ignition off, then hold down the trip meter button while turning the ignition back to "ON." The maintenance light should begin to blink and then go out, indicating a successful reset.
The Lexus CT 2014 uses a Nickel-Metal Hydride (NiMH) battery pack for its hybrid electric motor system. This battery type is known for its reliability and efficiency in hybrid vehicles.
It is recommended to service the hybrid electric system of your Lexus CT 2014 every 5,000 to 10,000 miles, depending on your driving habits and conditions. Always refer to the owner's manual for specific maintenance schedules and consult with your Lexus service center.
Common issues reported by Lexus CT 2014 owners include problems with the infotainment system, minor electrical glitches, and occasional battery concerns. Regular maintenance and software updates can help address these issues.
To improve fuel efficiency, ensure your tires are properly inflated, keep up with regular maintenance, use the ECO driving mode, and minimize excessive idling. Additionally, avoid carrying unnecessary weight and maintain a steady driving speed.
The recommended tire pressure for a Lexus CT 2014 is typically 33 psi for both the front and rear tires. Always check the owner's manual or the sticker inside the driver's door for the most accurate information.
To replace the key fob battery, first remove the mechanical key by pressing the release button. Use a small flathead screwdriver to gently pry open the fob casing. Replace the old battery with a new CR1632 battery, ensuring the positive side faces up. Reassemble the fob and reinsert the mechanical key.
The Lexus CT 2014 hybrid system does not require external charging as it uses regenerative braking and the internal combustion engine to keep the battery charged. It is not a plug-in hybrid vehicle.
If your Lexus CT 2014 won't start, check the battery connections and ensure the battery is charged. If the issue persists, inspect the fuses and key fob for any issues. If none of these solutions work, it may be necessary to contact a professional mechanic or Lexus service center.
To update the navigation system, visit the Lexus website to purchase the latest map updates. Follow the instructions provided to download the update to a USB drive. Insert the USB drive into the vehicle's USB port, then follow the on-screen prompts to complete the update process.