Kubota RCF3672 Operator's Manual

Kubota RCF3672 Cutter manual cover
Pages 48
Year 2020
Language(s)
English en

Kubota RCF3672 Cutter Specification

The Kubota RCF3672 Cutter is engineered to deliver efficient and robust performance in agricultural and landscaping tasks. It features a cutting width of 72 inches, making it suitable for medium to large-scale operations. The cutter is equipped with a Category I three-point hitch, ensuring compatibility with a wide range of tractors. Its design incorporates a heavy-duty gearbox rated at 60 horsepower, providing the necessary power to tackle dense vegetation and challenging terrain.

The construction of the RCF3672 emphasizes durability and longevity, with a reinforced steel deck and sidebands that offer resistance against impact and wear. The cutter includes a slip clutch protection system, safeguarding the drivetrain from overload and reducing maintenance downtime. Height adjustment is facilitated by a flexible rear wheel, allowing for precise control over cutting height to achieve desired results across varying landscape conditions.

Additionally, the cutter is equipped with replaceable skid shoes, which prevent damage to the deck when operating on uneven surfaces. The blades are made from high-quality steel, ensuring sharpness and durability for consistent cutting performance. The RCF3672 is designed with operator safety in mind, featuring a safety chain shielding system that minimizes the risk of debris discharge during operation.

Overall, the Kubota RCF3672 Cutter combines robust construction, powerful performance capabilities, and practical safety features, making it a reliable choice for users seeking efficient vegetation management solutions.

Kubota RCF3672 Cutter F.A.Q.

How do I properly attach the Kubota RCF3672 Cutter to my tractor?

To attach the Kubota RCF3672 Cutter, ensure that your tractor is on a level surface. Align the cutter's hitch with the tractor's three-point hitch. Secure the top link and lift arms, ensuring all pins are locked in place. Finally, attach the PTO shaft, ensuring it clicks into place securely.

What is the recommended maintenance schedule for the Kubota RCF3672 Cutter?

Perform a general inspection before each use. Check and tighten all bolts and fasteners, inspect the blades for wear or damage, and ensure the PTO shaft is lubricated every 8 hours of operation. Change the gearbox oil annually or every 100 hours of use, whichever comes first.

How can I troubleshoot uneven cutting with the Kubota RCF3672 Cutter?

Uneven cutting may be caused by dull blades, improper tire pressure, or an uneven ground. Ensure the blades are sharp and balanced. Check that the tractor tires are inflated to the recommended pressure and adjust the cutting height to match the terrain.

What steps should I take if the Kubota RCF3672 Cutter vibrates excessively during operation?

Excessive vibration can be due to an unbalanced blade or debris buildup. Inspect and clean the blades, removing any debris. Ensure the blades are properly aligned and balanced. If vibration persists, check the PTO shaft for damage or misalignment.

How do I safely change the blades on the Kubota RCF3672 Cutter?

To change the blades, ensure the cutter is turned off and the PTO is disengaged. Secure the cutter on a stable platform. Use a wrench to remove the blade bolts, then replace with new blades. Tighten the bolts to the manufacturer's specifications.

What should I do if the Kubota RCF3672 Cutter is not cutting effectively?

If the cutter is not cutting effectively, check for dull or damaged blades and replace them if necessary. Ensure the PTO speed is set correctly and that the cutter height is adjusted for the material being cut.

How can I ensure the longevity of the Kubota RCF3672 Cutter?

To ensure longevity, regularly clean the cutter after each use, store it in a dry place, and adhere to the maintenance schedule. Regularly inspect the blades, gearbox, and PTO shaft for wear and lubricate moving parts as necessary.

What gear oil should I use for the Kubota RCF3672 Cutter?

Use SAE 80W-90 gear oil for the Kubota RCF3672 Cutter gearbox. Ensure the oil meets or exceeds the API GL-5 specification. Always check the owner's manual for specific recommendations.

How do I adjust the cutting height on the Kubota RCF3672 Cutter?

To adjust the cutting height, use the tractor's lift controls to raise or lower the cutter to the desired height. Alternatively, adjust the skid shoes or spacer washers on the wheel arms to set a consistent height.

What is the correct PTO speed for operating the Kubota RCF3672 Cutter?

The correct PTO speed for the Kubota RCF3672 Cutter is 540 RPM. Operating at this speed ensures optimal cutting performance and reduces the risk of damage to the cutter or tractor.