KitchenAid KUBL214KSB Use and Care Guide
![KitchenAid KUBL214KSB Refrigerator manual cover](/images/TmLaRYioUAisxiArlmcEJxyu/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control panel inside the unit. Use the up or down arrows to set your desired temperature. The recommended setting is 37°F (3°C) for the refrigerator.
First, ensure that the refrigerator is plugged in and the power is on. Check the temperature settings and adjust if necessary. Clean the condenser coils and ensure the door seals are not damaged. If the problem persists, contact a professional technician.
It is recommended to clean the condenser coils every six months to ensure optimal performance. Use a vacuum or a coil brush to remove dust and debris.
Water pooling can be caused by a clogged defrost drain. Clear the drain using a mixture of warm water and baking soda to ensure proper drainage.
Locate the water filter compartment inside the refrigerator. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks in place. Run water through the dispenser for a few minutes to clear any air.
Store raw meat on the bottom shelf to prevent contamination. Use clear containers for easy visibility, and label leftovers with dates. Keep frequently used items at eye level for easy access.
Unusual noises can be due to the refrigerator being uneven. Ensure it is level by adjusting the leveling legs. Additionally, check for any loose items inside that may be vibrating.
To manually defrost, unplug the refrigerator and remove all food items. Leave the door open to allow the ice to melt. Clean and dry the interior before plugging it back in.
Check if the bulb is burnt out and replace it with a compatible one. If the bulb is not the issue, inspect the door switch for any faults. Consult a technician if the problem persists.
Ensure the refrigerator is positioned away from heat sources and has adequate ventilation. Keep the door closed as much as possible, and ensure the seals are intact. Regularly clean the condenser coils to maintain efficiency.