KitchenAid KSM70SNDXBM Owner's Manual

To attach the bowl, align the bowl's notches with the mixer's pins and twist it clockwise until it locks securely into place.
Ensure that the mixer is plugged into a functioning power outlet. Check the reset button on the mixer, and make sure the speed control lever is set to the OFF position before trying again.
Unplug the mixer. Use a damp cloth to wipe the exterior and a soft brush for crevices. Detachable parts like the bowl and beaters can be washed in warm soapy water.
To install attachments, tilt the mixer head up, insert the attachment into the power hub, and rotate it until it fits snugly. Then secure it by tightening the thumb screw.
Turn the mixer off and unplug it. Tilt the head back and turn the screw located on the hinge pin. Turn it clockwise to lower the beater and counterclockwise to raise it.
Regularly check for wear and tear on attachments, ensure the power cord is intact, and clean the mixer after each use to maintain performance and hygiene.
Check if the mixer is overloaded or if the attachment is not correctly installed. If the noise persists, inspect the gears and motor, or consult a professional technician.
Yes, the mixer is powerful enough for heavy doughs. Use the appropriate dough hook attachment and operate at recommended speeds to avoid strain on the motor.
Turn off the mixer and unplug it. Allow it to cool down for at least 30 minutes before resuming use. Ensure that the vents are not blocked during operation.
Start mixing on a lower speed and gradually increase it. Using a pouring shield can also help minimize splattering.