Kenmore 99098 111.99098 Use and Care Guide

To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrows to set your desired temperature for both the refrigerator and freezer compartments.
Unusual noises can be due to several reasons, such as the refrigerator not being level, items inside the refrigerator vibrating, or the compressor starting up. Ensure the refrigerator is level and check for any loose items.
Check if the vents inside the refrigerator are blocked by food items. Ensure the temperature settings are correct and the door seals are clean and undamaged. If the problem persists, consider contacting a professional technician.
It's recommended to clean the condenser coils every six months to maintain efficient operation. Use a vacuum or brush to remove dust and debris.
The Kenmore 99098 refrigerator is typically frost-free, but if manual defrosting is necessary, remove all food and unplug the refrigerator. Allow the ice to melt and clean up any water before plugging it back in.
Locate the water filter compartment, usually in the upper right corner of the refrigerator. Twist the old filter counterclockwise to remove it and replace it with a new one by twisting clockwise until secure.
Ensure the ice maker is turned on and connected to the water supply. Check for any ice blockages in the ice maker or dispenser. If the issue persists, reset the ice maker or consult the manual for further troubleshooting steps.
To adjust the door hinges, first, make sure the refrigerator is level. Then, use a wrench to loosen the hinge bolts and adjust the door to your desired position. Tighten the bolts once the door is aligned properly.
Water pooling can be due to a clogged defrost drain. To fix this, try clearing the drain hole using a pipe cleaner or a similar tool. Ensure that the refrigerator is level to avoid water accumulation.
Regular maintenance tasks include cleaning the condenser coils, checking and replacing the water filter, inspecting door seals, and ensuring proper temperature settings. This helps in maintaining efficiency and longevity.