Kenmore 99012 111.9901 Energy Guide
![Kenmore 99012 111.9901 Refrigerator manual cover](/images/OQtCLTawcDyFPyuupMXUjXFT/thumbs/thumb175x175.webp)
To set the temperature, locate the temperature control dial inside the refrigerator. Set the dial to the recommended setting, typically in the middle range, and allow 24 hours for the temperature to stabilize. Adjust as necessary based on the food storage needs.
Check if the refrigerator is plugged in and the circuit breaker is not tripped. Ensure the vents inside the refrigerator are not blocked by food items. Clean the condenser coils to improve cooling efficiency. If the issue persists, consult a technician.
It is recommended to clean the condenser coils at least twice a year. This helps maintain efficient operation and prevents overheating of the compressor.
To defrost, remove all items from the freezer, unplug the refrigerator, and leave the freezer door open. Place towels around the base to catch water from melting ice. Once defrosted, clean and dry the interior before plugging the refrigerator back in.
Ensure the refrigerator is placed in a cool area away from direct sunlight and heat sources. Keep the door closed as much as possible and check that the door seals are tight. Regularly clean the condenser coils for optimal efficiency.
Water pooling may be due to a blocked defrost drain. Clear the drain using a mixture of warm water and vinegar. If the problem persists, check for ice buildup or inspect the drain pan for leaks.
Perform a simple test by closing the door on a piece of paper. If you can pull the paper out easily, the seals may need to be cleaned or replaced. Good seals should hold the paper firmly in place.
Unusual noises can be caused by the refrigerator being unlevel, items inside vibrating, or parts like the fan or compressor malfunctioning. Ensure the refrigerator is level and that items are not touching the walls. If noise persists, contact a technician.
Yes, it is normal for the back of the refrigerator to feel warm as the heat is expelled by the condenser coils. However, if it feels excessively hot, ensure the coils are clean and there is enough clearance around the refrigerator for proper ventilation.
Locate the water filter inside the refrigerator. Turn the filter counterclockwise to remove it and insert the new filter by turning it clockwise until it is secure. Run water through the dispenser for a few minutes to clear any air or debris.