Kenmore 7076 60495 Energy Guide
![Kenmore 7076 60495 Refrigerator manual cover](/images/JIvmHxIKglSLAoQgljKqsszj/thumbs/thumb175x175.webp)
To change the water filter, locate it in the upper right corner of the refrigerator compartment. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it clicks into place. Run water through the dispenser for a few minutes to clear air and impurities.
First, check if the temperature settings are correct. Ensure that the vents inside the fridge are not blocked. Clean the condenser coils located at the back or bottom of the unit. If issues persist, consider checking the door seals for gaps or wear and replace if necessary.
Unplug the refrigerator and locate the condenser coils at the back or beneath the appliance. Use a vacuum with a brush attachment to remove dust and debris. For stubborn dirt, carefully wipe the coils with a damp cloth. Reconnect the power after cleaning.
To defrost the freezer, remove all food items and unplug the refrigerator. Leave the freezer door open to allow ice to melt naturally. Place towels on the floor to absorb water. Once defrosted, clean the interior with a mild detergent, dry it, and plug the refrigerator back in.
Locate the ice maker reset button, typically on the ice maker's control module. Press and hold the button for about 10 seconds or until you hear a chime. Release the button and wait for the ice maker to reset.
Unusual noises can result from the refrigerator not being level, items inside vibrating, or the condenser fan being obstructed. Ensure the unit is level and that contents are not touching the walls. Check the back of the fridge for any obstructions in the fan area.
Ensure door seals are tight and undamaged. Set the temperature to the manufacturer-recommended settings. Keep the condenser coils clean and avoid placing the refrigerator near heat sources. Limit the frequency and duration of door openings.
Check if the door seals are clean and intact. Ensure that shelves or food items are not obstructing the door. Adjust the refrigerator's leveling legs to ensure the unit is balanced. If the problem persists, the door hinges may need adjustment or replacement.
Unplug the refrigerator. Locate the light cover inside the fridge, typically near the top. Remove the cover by pressing or sliding it off. Carefully unscrew the old bulb and replace it with a new one of the same size and type. Reattach the cover and plug the unit back in.
Store food in airtight containers and regularly check for expired items. Clean spills immediately and wipe down the interior with a mixture of baking soda and water. Place an open box of baking soda in the fridge to absorb odors.