Contents

1. Cracks in a ceramic glass cooktop that are not a result of thermal shock.
2. Stains and scratches on a ceramic glass cooktop resulting from accident or improper operation or maintenance.
3. Discoloration of cooktop surfaces resulting from normal use.
4. Expendable items that can wear out from normal use, including but not limited to filters, belts, bags or screw-in base light bulbs.
5. A service technician to clean or maintain this appliance, or to instruct the user in correct appliance installation, operation and maintenance.
6. Service calls to correct appliance installation not performed by Sears authorized service agents, or to repair problems with house fuses, circuit breakers, house wiring, and plumbing or gas supply systems resulting from such installation.
7. Damage to or failure of this appliance resulting from installation not performed by Sears authorized service agents, including installation that was not in accord with electrical, gas or plumbing codes.
8. Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly operated and maintained according to all supplied instructions.
9. Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident, alteration, abuse, misuse or use for other than its intended purpose.
10. Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.
11. Damage to or failure of parts or systems resulting from unauthorized modifications made to this appliance.
12. Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined to have the appropriate certification logo.
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS
- Read all instructions before using this appliance.
  - This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
  - Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type.
  - Warnings and important instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur. Common sense, caution, and care must be exercised with installing, maintaining, or operating your appliance.
  - DEFINITIONS
  - This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  - - Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury.
  - - Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
  - IMPORTANT - Indicates installation, operation, maintenance, or valuable information that is not hazard related.
  - NOTE - Indicates a short, informal reference something written down to assist the memory or for future reference.
  - IMPORTANT INSTRUCTIONS FOR UNPACKING AND INSTALLATION
  - IMPORTANT - Read and follow the below instructions and precautions for unpacking, installing, and servicing your appliance:
  - Remove all tape and packaging before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow children to play with packaging material. Do not remove the wiring label and other literature attached to the app...
  - Cold temperatures can damage the electronic control. When using this appliance for the first time, or when the appliance has not been used for an extended period of time, be sure the appliance has been in temperatures above 32F (0C) for at least ...
  - Never modify or alter the construction of the appliance by removing the leveling legs, panels, wire covers, anti-tip brackets/screws, or any other part of the appliance.
  - Be sure to have an appropriate foam-type fire extinguisher available, visible, and easily accessible located near the appliance.
  - GROUNDING INSTRUCTIONS
  - - Avoid fire hazard or electrical shock. Failure to follow this warning may cause serious injury, fire, or death.
  - - Avoid fire hazard or electrical shock. Do not use an adapter plug, use an extension cord, or remove grounding prong from the power cord. Failure to follow this warning may cause serious injury, fire, or death.
  - Proper InstallationBe sure your appliance is properly installed and grounded by a qualified technician. In the United States, install in accordance with the National Fuel Gas Code ANSI Z223.1/NPFA No. 54, latest edition and National Electrical Cod...
  - For personal safety, this appliance must be properly grounded. For maximum safety, the power cord must be securely connected to an electrical outlet or junction box that is the correct voltage, is correctly polarized and properly grounded, and protec...
  - It is the personal responsibility of the consumer to have the appropriate outlet or junction box with the correct, properly grounded wall receptacle installed by a qualified electrician. It is the responsibility and obligation of the consumer to cont...
  - See the installation instructions packaged with this appliance for complete installation and grounding instructions.
  - IMPORTANT INSTRUCTIONS FOR USING THE APPLIANCE
  - - Storage In or On Appliance Flammable materials should not be stored in an oven or microwave, near surface burners or elements, or in the storage or warmer drawer (if equipped). This includes paper, plastic, and cloth items, such as cookbooks, pl...
  - - Do not leave children alone - Children should not be left alone or unattended in the area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance, including the storage drawer, lower broiler drawer, warm...
  - - Do not store items of interest to children in the cabinets above the appliance or on the backguards of ranges. Children climbing on or near the appliance to reach items could be seriously injured.
  - - Do not allow children to climb or play around the appliance. The weight of a child on an open oven door may cause the appliance to tip, resulting in serious burns or other injury. An open drawer when hot may cause burns.
  - - Stepping, leaning, or sitting on the door or drawers of this appliance can result in serious injuries and also cause damage to the appliance.
  - - Never cover any slots, holes or passages in the oven bottom or cover and entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, ...
  - - Do not use oven or warmer drawer (if equipped) for storage.
  - - Never use your appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the appliance.
  - - When heating fat or grease, watch it closely. Grease may catch fire if it becomes too hot.
  - - Do not use water or flour on grease fires. Smother fire or flame or use dry chemical or foam-type extinguisher. Cover the fire with a pan lid or use baking soda.
  - - Use dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholders touch hot cooking areas. Do not use towels or other bulky cloths.
  - - Do not heat unopened food containers - Build-up of pressure may cause container to burst and result in injury.
  - - Wear proper apparel - Loose- fitting or hanging garments should never be worn while using the appliance. Do not let clothing or other flammable materials contact hot surfaces.
  - - Do not touch surface burners or elements, areas near these burners or elements, interior surfaces of the oven, or the warmer drawer (if equipped). Surface burners and elements may be hot even though they appear cool. Areas near surface burners and ...
  - - Do not attempt to operate the appliance during a power failure. If the power fails, always turn off the appliance. If the appliance is not turned off and the power resumes, electric surface elements may resume operation when power is restored. Once...
  - IMPORTANT INSTRUCTIONS FOR USING YOUR RADIANT COOKTOP
  - Know which knob or key controls each surface heating area. Place cookware with food on the cooking area before turning it on. Turn the cooking area off before removing the cookware.
  - Cookware handles should be turned inward and not extend over adjacent surface elements To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the cookware should be ...
  - Use proper pan size - This appliance is equipped with one or more surface units of different sizes. Select cookware with flat bottoms that match the surface unit size. Using the proper cookware on the cooking area will improve efficiency.
  - Glazed cooking utensils Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cooktop service without breaking due to the sudden change in temperature. Check the manufacturers recommendati...
  - Improper cookware may break due to sudden changes in temperature. Check the cookware manufacturers recommendations for cooktop use.
  - Never leave surface elements unattended. Boil-overs may cause smoking and greasy spills that may ignite. A pan that has boiled dry could be damaged and may damage the cooktop.
  - Do not use a searing grill meant for use with a broiler pan on the cooktop. The searing grill is not designed for use on the cooktop. Doing so may result in a fire.
  - When you are flaming foods under a ventilating hood, turn on the fan.
  - IMPORTANT INSTRUCTIONS FOR GLASS AND CERAMIC COOKTOPS
  - Do Not Clean or Operate a Broken Cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.
  - Clean cooktop glass with caution. If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid a steam burn. Some cleaners can produce harmful fumes if applied to a hot surface.
  - Avoid scratching the cooktop glass with sharp objects.
  - IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN
  - Protective linersDo not use aluminum foil, aftermarket oven liners, or any other materials or devices to line oven bottom, oven racks, or any other part of the appliance. Only use aluminum as recommended for baking, such as lining cookware or as a...
  - Use care when opening oven door, lower oven door, or warmer drawer (some models). Stand to the side of the appliance when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.
  - Keep oven vent ducts unobstructed. Touching surfaces in this area when the oven is on may cause severe burns. Do not place plastic or heat-sensitive items on or near the oven vent. These items can melt or ignite.
  - Placement of oven racks - Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot burner or element in oven. Use potholders and grasp the rack with both hands to reposi...
  - Do not use a broiler pan without its insert. Broiler pans and inserts allow dripping fat to drain away from the high heat of the broiler. Do not cover the broiler insert with aluminum foil; exposed fat and grease could ignite.
  - Do not cook food on the oven bottom. Always cook in proper cookware and always use the oven racks.
  - IMPORTANT INSTRUCTIONS FOR CLEANING YOUR APPLIANCE
  - - Before manually cleaning any part of the appliance, be sure all controls are turned off and the appliance is cool. Cleaning a hot appliance can cause burns.
  - Clean the appliance regularly to keep all parts free of grease that could catch fire. Do not allow grease to accumulate. Greasy deposits in the fan could catch fire.
  - Always follow the manufacturers recommended directions for use of kitchen cleaners and aerosols. Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury.
  - Clean venitlating hoods frequently - Grease should not be allowed to accumulate on hood or filter. Follow the manufacturers instructions for cleaning vent hoods.
  - IMPORTANT INSTRUCTIONS FOR SELF CLEANING OVENS
  - Do not clean the oven door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.
  - Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the appliance.
  - Use the self clean cycle to clean only the parts listed in this manual.
  - Before using self clean, remove the broiler pan, any food, utensils, and cookware from the oven, storage drawer or warming drawer (if equipped). Remove oven racks unless otherwise instructed.
  - Some birds are extremely sensitive to the fumes given off during the self clean cycle of any oven. Move birds to another well-ventilated room.
  - IMPORTANT INSTRUCTIONS FOR SERVICE AND MAINTENANCE
  - Do not repair or replace any part of the appliance unless specifically recommended in the manuals. All other servicing should be done only by a qualified technician. This reduces the risk of personal injury and damage to the appliance.
  - Always contact your dealer, distributor, service agent, or manufacturer about problems or conditions you do not understand.
  - Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the appliance at the circuit breaker or fuse box in case of an emergency.
  - Remove the oven door from any unused oven if it is to be stored or discarded.
  - Do not touch a hot oven light bulb with a damp cloth. Doing so could cause the bulb to break. Handle halogen lights (if equipped) with paper towels or soft gloves. Disconnect the appliance or shut off the power to the appliance before removing and re...
  - - California Residents: for cancer and reproductive harm information, visit www.P65Warnings.ca.gov
- Cooking Recommendations
  - Bakeware
- Before Setting Surface Controls
  - Using Proper Cookware
    - Figure 1: Testing cookware
    - Figure 2: Proper cookware
  - Cookware Material Types
  - About the Ceramic Glass Cooktop
  - About the Radiant Surface Elements
  - Element On and Hot Surface Indicator Lights
    - Figure 3: Element indicator light
  - Types of ceramic cooktop elements
    - Figure 4: Single and double elements
- Setting Surface Controls
  - Single radiant surface elements (all models)
    - 1. Place correctly sized cookware on surface element.
    - 2. Push in and turn the surface control knob in either direction (Figure 1) to the desired setting (refer to the Suggested radiant surface element settings in Table 1).
    - 3. When cooking is complete, turn the radiant surface element OFF before removing the cookware.
  - Suggested radiant surface element settings
    - Table 1: Suggested radiant surface element settings
    - Figure 1: Single element knob
  - Dual radiant surface elements (some models)
    - 1. Place correctly sized cookware on the surface element.
    - 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer elements. If only the inner element is needed for smaller cookware, push in and turn the knob counter-clockwise (see Figure 2).
    - 3. When cooking is complete, turn the knob to OFF before removing the cookware.
    - Figure 2: Dual element knob settings
  - - Do not place flammable items such as plastic salt and pepper shakers, spoon holders, or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels, or wooden spoons could catch fire if placed too c...
  - Warm Zone (some models)
    - 1. Press Warm Zone on the control panel.
    - 2. When ready to serve, press Warm Zone again to turn the warmer off. The hot surface indicator light will remain on until the warm zone cools.
  - Home Canning
- Before Using Oven
  - Oven Vent Location
    - Figure 1: Oven vent
  - Types of oven racks
    - Figure 2: Oven rack types
  - Removing, replacing, and arranging flat or offset oven racks
- Oven Controls
  - 2
    - 1. Bake - Selects Bake function.
    - 2. Broil - Selects Broil function.
    - 3. Convec Bake - Use to set convection feature.
    - 4. Warm & Hold - Use to keep cooked food warm and at serving temperature for up to 3 hours.
    - 5. Self Clean - Use to select 2, 3, or 4hr Self-Clean cycle.
    - 6. Steam Clean - Use to select Steam Clean cycle.
    - 7. PREHEAT indicator light - Is on when oven is preheating. Stays on until the oven reaches the desired temperature.
    - 8. OVEN LOCK indicator light - Is on when door locks or unlocks and when oven lockout is active.
    - 9. OVEN ON indicator light - Glows each time the oven cycles on to maintain the set oven temperature.
    - 10. START - Use to start all cooking functions.
    - 11. Up / Down arrows - Use with the function keys to accept settings and adjust temperature and times.
    - 12. STOP - Cancels any active oven function except clock and timer.
    - 13. Timer ON/Off - Use to set and cancel the timer and to set the Continuous Bake feature.
    - 14. Set Clock - Use with arrow keys to set time of day.
    - 15. Cook Time - Use to set a specific amount of time needed for cooking. Automatically cancels cooking process at end of set time.
    - 16. Delay Start - Use with Bake and Self Clean functions to program a delayed start bake or delayed start self clean cycle.
    - 17. LIGHT - Use to turn internal oven light on and off.
    - 18. Warm Zone - Use to turn the surface Warm Zone on and off.
    - Minimum and Maximum Control Settings
      - Table 1: Minimum and maximum control settings
  - 170F (77C)
  - 550F (288C)
  - LO
  - Hi
  - 170F (77C)
  - 550F (288C)
  - 1 minute
  - 11 hrs. 59 mins.
  - 2 Hours
  - 4 Hours
  - 170F (77C)
  - 3 Hours
  - 1 Minute
  - 11:59
  - 1:00
  - 12:59
  - 0:00
  - 23:59
  - 1:00
  - 12:59
  - 0:00
  - 23:59
    - Setting Clock
      - 1. Press CLOCK once. CLO appears in display.
      - 2. Press or and the time appears in the display. Continue to hold arrow key until the correct time of day appears in the display.
      - 3. Press START to accept time of day.
    - Oven Lock
      - 1. Be sure the door is completely closed.
      - 2. Press and hold and together for 3 seconds. Loc will appear in the display. The OVEN LOCK indicator light will flash while the motor driven door latch begins locking the oven door. Do not open the door during this time. Allow 15 seconds for the doo...
      - 1. Press and hold and together for 3 seconds. The OVEN LOCK indicator light will flash and the motor driven door latch will begin to unlock. Do not open the door at this time. The door will unlock completely in about 15 seconds.
      - 2. The oven control keys will be available, and the oven door can be opened again.
    - Silent or audible control mode
      - 1. Press and hold Delay Start until the control beeps once (about 3 seconds). The present mode appears as OFF (silent operation) or ON (for audible operation).
      - 2. Use or to toggle between audible or silent modes. To save, press START when the desired mode of operation appears in the display.
    - Changing Temperature Display to Fahrenheit (F) or Celsius (C)
      - 1. Press Broil. HI appears in the display.
      - 2. Press and hold Broil until F or C appears in the display.
      - 3. Press either or to toggle between F or C mode choices.
      - 4. Press START to accept change. The display will return to the time of day.
    - Operating Oven Light
    - Changing between continuous bake setting or 12-hour energy saving feature
      - 1. Press and hold Timer Set/Off until the control beeps once (about 6 seconds). 12hr will appear in display.
      - 2. Press or key to toggle between continuous bake (- - hr) and 12hr Energy Saving (12hr).
    - Setting Timer
      - 1. Press Timer ON/OFF.
      - 2. Press and hold to increase the time. Release when the desired time appears in the display.
      - 3. Press START, and the timer will begin to count down.
      - 4. When the set time has run out, the timer will sound with three beeps and will continue to beep three times every 60 seconds until Timer ON/OFF is pressed.
    - Setting Bake
      - 1. Arrange oven racks and close oven door.
      - 2. Press Bake. 350 appears in display.
      - 3. Within 15 seconds, press or . The display will show the default oven temperature of 350F (177C). By pressing or , the oven temperature may be adjusted in 5F increments (1C).
      - 4. Press START when the desired temperature appears. The oven will begin heating to the selected temperature. When the oven temperature reaches the set temperature, the PREHEAT indicator light will turn off, and the oven control will beep three times.
      - 1. Press Bake. The current set oven temperature will display.
      - 2. Press or to increase or decrease the current set temperature to the new oven temperature.
      - 3. Press START.
      - Figure 1: Baking on multiple levels
    - 1
      - Figure 2: Oven rack positions
      - Setting Cook Time
        
        1. Be sure that the clock displays the correct time of day. Arrange oven racks and close oven door.
        
        2. Press Bake. 350 appears in display.
        
        3. Within 15 seconds, press or . The display will show the default oven temperature of 350F (177C). By pressing or , the temperature may be adjusted in 5F increments (1C). Press START to accept.
        
        4. Press Cook Time. 00 will appear in display.
        
        5. Press or to reach the desired cook time.
        
        6. Press START to accept. When the oven temperature reaches the set temperature, the PRE HEAT indicator light turns off and the oven control will beep once.
        
        7. To cancel at anytime, press.
        
        1. Press Bake (for oven temperature) or Cook Time.
        
        2. To adjust temperature or cook time, press or and release when the desired temperature or cook time setting appears in the display.
      - Setting Delay Start
        
        1. Be sure that the clock displays the correct time of day.
        
        2. Arrange oven racks and close oven door.
        
        3. Press Bake. 350 appears in display.
        
        4. Within 15 seconds, press or . The display will show the default oven temperature of 350F (177C). By pressing or , the oven temperature may be adjusted in 5F increments (1C). When desired temperature is reached press START to accept.
        
        5. Press Cook Time. 00 will appear in display.
        
        6. Press the or to set the desired cook time. Then press START to accept.
        
        7. Press Delay Start. The time of day will appear in the display. Press or until the desired starting time appears in the display and press START.
        
        8. The oven will turn on at the set delayed starting time and begin heating. When the oven temperature reaches the set temperature, the PRE HEAT indicator light will turn off and the oven control will beep three times.
        
        1. Press Bake (for oven temperature) or Cook Time.
        
        2. Press or and release when the desired temperature or cook time setting appears in the display.
        
        3. Press START.
      - Convection Bake
        
        1. Arrange oven racks and close oven door.
        
        2. Press Convec Bake. 350 will appear in the display.
        
        3. By pressing or , the oven temperature may be adjusted in 5F increments (1C). When setting for convection, be sure to set the oven temperature between 170F (77C) and 550F (288C).
        
        Figure 3: Air movement using convection
        
        Figure 4: Baking on multiple levels
      - Setting Broil
        
        1. Arrange the oven racks when cool. For optimum browning results, preheat oven for 2 minutes before adding food.
        
        2. Position cookware in oven. Leave door open at broil stop position.
        
        Figure 5: Door open for broiling
        
        3. Press Broil. HI will appear in display.
        
        4. Press or until the desired broil setting level appears in the display. Press for HI broil or for LO broil setting.
        
        5. Press START. Broil on one side until food is browned. Turn and broil food on other side. When finished broiling, press STOP.
    - - Figure 6: Broiler pan and insert
      - Figure 7: Rack positions
      - Table 2: Suggested Broil Settings
  - 6th*
  - Hi
  - 6
  - 6
  - Rare
  - 6th or 7th*
  - Hi
  - 8
  - 6
  - Medium
  - 5th or 6th*
  - Hi
  - 10
  - 8
  - Medium-well
  - 5th or 6th*
  - Hi
  - 11
  - 10
  - Well
  - 5th
  - Hi
  - 12
  - 8
  - Well
  - 5th
  - Lo
  - 25
  - 15
  - Well
  - 5th
  - Lo
  - 10
  - 8
  - Well
  - 5th
  - Hi
  - as directed
  - Well
  - 4th
  - Hi
  - as directed
  - Well
  - 5th or 6th
  - Hi
  - 12
  - 10
  - Medium
    - Warm & Hold
      - 1. If needed, arrange oven racks and place cooked food in oven.
      - 2. Press Warm & Hold. HLd will appear in the display. If no other keys are touched within 25 seconds, the request for Warm & Hold will clear.
      - 3. Press START.
      - 4. Warm & Hold will automatically turn off after 3 hours.
      - 1. Press Bake. Press or to set temperature.
      - 2. Press START.
      - 3. Press Cook Time. Press or to set time.
      - 4. Press START.
      - 5. Press Warm & Hold.
      - 6. Warm & Hold is set to turn on automatically after the Timed Bake or Delay Timed Bake has finished. The Warm & Hold indicator light will glow indicating that the Warm & Hold feature is set to start when the timed bake is finished.
    - Adjusting oven temperature
      - 1. Press Bake and hold for 3 seconds. The UPO value will appear in the display with a degree sign.
      - 2. The display now indicates the amount of degrees offset from the original factory temperature setting. If the control still has the original factory calibration, the display will read 0.
      - 3. The temperature may be adjusted up or down 35F (19C), in 5F increments by pressing and holding or . Adjust until the desired amount of temperature offset appears in the display and press START to save.
      - 4. If the STOP key is pressed during the programming mode, the UPO value will remain unchanged.
    - Self Clean
      - Figure 8: Areas to clean and to avoid
      - Setting Self Clean
        
        1. Be sure the oven in empty and all oven racks are removed. Remove all items from the cooktop. Be sure the oven door is completely closed.
        
        2. Press Self Clean. 3:00 appears in the display.
        
        3. To change to a 2 hour clean time, press . 2:00 appears in the display. To select a 4 hour clean time, press . 4:00 appears in the display.
        
        4. After selecting the clean time, press START to activate Self Clean. The OVEN LOCK indicator light will light, and CLn will appear in the display.
        
        1. The time of day will appear in the display window, and the and the OVEN LOCK indicator light will continue to glow.
        
        2. Once the oven has cooled down (about 1 hour) and the OVEN LOCK indicator light has turned off, the oven door may be opened.
        
        3. When the oven interior has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper towel.
      - Delayed Start Self Clean
        
        1. Be sure the oven is empty and all oven racks are removed. Remove all items from the cooktop. Be sure oven door is completely closed.
        
        2. Be sure the clock shows the correct time of day.
        
        3. Press Delay Start.
        
        4. Press and hold to scroll to the time desired to start the self clean cycle. Press START when the desired start time is displayed.
        
        5. Press Self Clean. 3:00 appears in the display.
        
        6. To select a 2 hour clean time, press . 2:00 appears in the display. To select a 4 hour clean time, press . 4:00 appears in the display.
        
        7. After selecting the desired clean time, press START. Self Clean is set to activate. The OVEN LOCK indicator light will turn on, and the oven door will lock in advance of the starting time. Once the starting time is reached, CLn will appear in the ...
        
        1. Press .
        
        2. If Self Clean has heated the oven to a high temperature, allow enough time for the oven to cool and for the OVEN LOCK indicator light to turn off. When this indicator light turns off, the oven door may be opened.
        
        3. Restart Self Clean, if needed.
      - Steam Clean
        
        1. Remove all racks and oven accessories.
        
        2. Scrape or wipe loose debris and grease from the oven bottom.
        
        3. Pour 1 cup of tap water onto the oven bottom. (Figure 9) Close oven door.
        
        Figure 9: Add 1 cup of tap water
        
        4. Press Steam Clean. StCn will appear in the display.
        
        5. Press START. 30:00 will appear in the display and start counting down.
        
        6. The time remaining in the Steam Clean cycle is shown in the display. Do not open the door during this time. If door is open while in Steam Clean (d-O) will appear in the display.
        
        7. When the steam clean cycle is complete an alert will sound and the END message will show in the display. Press off to return to the clock.
        
        8. Take care opening the door when the steam clean is finished. Stand to the side of the oven out of the way of escaping vapor.
        
        9. Wipe oven cavity and bottom. Do not clean oven door gasket (Figure 10). Avoid leaning or resting on the oven door glass while cleaning cavity.
        
        10. To cancel Steam Clean at any time press STOP.
        
        Figure 10: Clean around the oven door gasket
- Care & Cleaning
  - Figure 1: Use cleaners with caution
  - Cooktop Maintenance
    - Figure 2: Cooktop care
  - Cooktop Cleaning
    - Figure 3: Cooktop cleaning
  - Aluminum Foil and Utensils
  - Replacing the Oven Light
    - 1. Turn electrical power off at the main source or unplug the appliance.
    - 2. Remove the interior oven light shield after removing the wire holder by carefully moving the wire to the side of the glass shield. The tension from the wire holds the glass shield in place.
    - 3. Pull the shield straight out. Do not twist or turn.
    - 4. Replace the bulb with a new appliance bulb.
    - 5. Replace the glass oven light shield. Replace wire holder.
    - 6. Turn the power back on again at the main source (or plug the appliance back in).
    - 7. Be sure to reset the time of day on the clock.
    - Figure 4: Oven light protected by glass shield
  - Remove and replace storage drawer (some models)
    - Figure 5: Open storage drawer
    - Figure 6: Closed storage drawer
  - Removing and Replacing the Oven Door
    - 1. Open oven door completely, horizontal with floor (See Figure 7).
    - 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 8). A tool such as a small flat-blade screwdriver may be required.
    - 3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 9).
    - 4. Close the door to approximately 10 degrees from the door frame (See Figure 9).
    - 5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 10).
    - 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 9).
    - 2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 9 and Figure 10). The hook of the hinge arms must be fully seated onto the...
    - 3. Fully open the oven door, horizontal with floor (See Figure 7).
    - 4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position (See Figure 8).
    - 5. Close the oven door.
    - Figure 7: Door hinge location
    - Figure 8: Door hinge locks
    - Figure 9: Holding door for removal
    - Figure 10: Replacement and location of hinge arm and roller pin
  - Replacing the Oven Light
    - 1. Turn electrical power off at the main source or unplug the appliance.
    - 2. Remove the interior oven light shield after removing the wire holder by carefully moving the wire to the side of the glass shield. The tension from the wire holds the glass shield in place.
    - 3. Pull the shield straight out. Do not twist or turn.
    - 4. Replace the bulb with a new appliance bulb.
    - 5. Replace the glass oven light shield. Replace wire holder.
    - 6. Turn the power back on again at the main source (or plug the appliance back in).
    - 7. Be sure to reset the time of day on the clock.
    - Figure 11: Oven light protected by glass shield
  - Remove and replace storage drawer (some models)
    - Figure 12: Open storage drawer
    - Figure 13: Closed storage drawer
- Before You Call
  - Solutions to Common Problems:
  - Cooktop Problems
  - Self Clean Problems

Kenmore 92639 790.9263 Use and Care Guide

Kenmore 92639 790.9263 Range manual cover

Pages 40

Year 0

Language(s)

of 40

Kenmore 92639 790.9263 Range Specification

The Kenmore 92639 790.9263 Range is a high-performance kitchen appliance designed to enhance culinary efficiency and style. Featuring a sleek stainless steel finish, this range is equipped with a versatile 6.3 cubic feet oven capacity, offering ample space for large meals and multiple dishes. The cooktop comprises five burners, including a high-output burner for rapid boiling and a simmer burner for delicate sauces, providing optimal heat distribution for various cooking needs. The range incorporates electronic touch controls for precision settings and easy operation. The convection oven ensures even baking and roasting by circulating hot air throughout the cavity, while a variable broil option allows for customized browning. Safety features include a control lockout function to prevent accidental operation and a self-cleaning oven mode that simplifies maintenance by reducing the need for manual scrubbing. The inclusion of a hidden bake element not only aids in easy cleaning but also contributes to the even distribution of heat. Additionally, the range offers a storage drawer for convenient access to pots, pans, and other kitchen essentials. Designed for energy efficiency, the Kenmore 92639 meets modern standards, reducing electricity consumption without compromising performance. This range combines advanced technology with practical design, making it a valuable addition to any contemporary kitchen environment.

Kenmore 92639 790.9263 Range F.A.Q.

How do I clean the Kenmore 92639 790.9263 Range?

To clean your Kenmore range, first ensure it is turned off and cooled down. Use a mild detergent and a soft cloth for the surface. For tougher stains, a mixture of baking soda and water can be applied. Avoid using harsh chemicals or abrasive pads that can damage the finish.

What should I do if the oven does not heat up?

If the oven does not heat, check that it is properly plugged in and that the circuit breaker has not tripped. Ensure the oven controls are set correctly. If the issue persists, it may be a faulty heating element or thermostat, and professional repair may be required.

How can I troubleshoot an error code on my Kenmore range?

Refer to the user manual for a list of error codes and their meanings. Most issues can be resolved by resetting the range. Turn off the power for a few minutes, then turn it back on. If the error persists, contact customer support.

Why is the oven temperature inaccurate?

An inaccurate oven temperature may be due to a faulty sensor or a need for recalibration. Check the sensor for damage and consult the user manual for calibration instructions. If necessary, contact a technician for sensor replacement.

How do I replace the oven light bulb in the Kenmore 92639 range?

Ensure the oven is turned off and cool before replacing the bulb. Remove the bulb cover by turning it counterclockwise. Replace the old bulb with a new one of the same type and wattage. Finally, reattach the cover.

What maintenance is required for the Kenmore 92639 790.9263 Range?

Regular maintenance includes cleaning the range after use, checking and tightening any loose knobs, and inspecting the power cord for damages. Periodically check the oven seal for wear and replace it if necessary to ensure efficient operation.

How do I set the clock on my Kenmore range?

To set the clock, press the "Clock" button, then use the number pad to enter the current time. Press "Start" or "Enter" to confirm. The clock should now be set to the correct time.

What should I do if the range burners do not ignite?

Ensure the burners are clean and dry. Check if the igniter clicks when turned on. If not, clean the igniter with a soft brush. If the issue persists, the igniter may need replacement or a professional service call may be required.

Can I use aluminum foil in the oven of the Kenmore 92639 range?

While aluminum foil can be used for cooking, it should not be used to line the oven bottom or walls as it can interfere with heat distribution and damage the oven. Use it only on baking sheets and pans.

How do I use the self-cleaning feature on the Kenmore range?

Remove all racks and accessories from the oven. Close the door and select the self-cleaning cycle. Choose the desired cleaning duration and start the cycle. The oven will lock and heat to a high temperature to burn off residues. Allow it to cool before wiping the ashes away.