Kenmore 91782 796.8178 Use and Care Guide
![Kenmore 91782 796.8178 Washing Machine manual cover](/images/hPURiZDYsMIDvvinyRbHoYQV/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add the appropriate amount of detergent and fabric softener. Select the desired wash cycle using the cycle selector dial or buttons. Press the 'Start/Pause' button to begin the wash cycle.
Ensure that the washing machine is plugged in and the circuit breaker is not tripped. Check that the door is closed properly. Confirm that the water supply valves are turned on. If the machine still does not start, try resetting it by unplugging it for a few minutes.
Locate the filter access panel, usually found at the bottom front of the machine. Open the panel and remove the filter by turning it counterclockwise. Clean any lint or debris from the filter under running water. Reinstall the filter by turning it clockwise until secure.
Excessive vibration can occur if the washing machine is not level. Check and adjust the leveling feet to ensure the machine is stable. Also, ensure the load is balanced inside the drum. Avoid washing single heavy items that can cause imbalance.
To clean the detergent dispenser, pull out the dispenser drawer until it stops. Press down on the release lever to remove it completely. Rinse the compartments under warm water to remove any detergent residue. Reassemble the dispenser and slide it back into place.
Check if the drain hose is kinked or clogged. Ensure the drain pump filter is clean and not obstructed. Examine the drain pump for any blockages. If the issue persists, there may be a problem with the drain pump itself requiring professional service.
Make sure the washing machine is level on the ground. Check that the load is balanced and not concentrated on one side. Avoid overloading the washer, and use the correct cycle settings for your load type.
Regularly clean the drum and gasket to prevent mold and mildew. Inspect and clean the detergent dispenser and filter. Check hoses for signs of wear or leaks. Run a monthly maintenance cycle with a washing machine cleaner to remove any buildup.
Refer to the user manual for a list of error codes and their meanings. Follow the recommended troubleshooting steps for the specific error code displayed. If the error persists, contact Kenmore customer support for further assistance.
Yes, but ensure to use a cycle designed for waterproof or water-resistant items. Avoid using hot water or high spin speeds, as these can damage the waterproof layer. Check the care label on the item for any specific washing instructions.