Kenmore 75505 111.7503 Energy Guide

To change the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and rotate it clockwise until it is secure. Run water through the dispenser for a few minutes to clear any air.
First, check if the temperature settings are correct. Ensure that the vents are not blocked by food items. Clean the condenser coils and check if the door seals are intact. If the problem persists, consider contacting a technician.
Locate the ice maker's power switch, usually found in the freezer compartment. Turn the switch off, wait a few seconds, and then turn it back on. This should reset the ice maker.
The recommended temperature setting for the refrigerator is 37°F (3°C) and for the freezer is 0°F (-18°C).
Unplug the refrigerator and locate the condenser coils, which are usually at the back or bottom. Use a vacuum with a brush attachment to remove dust and debris. For thorough cleaning, use a coil cleaning brush.
Unusual noises can be caused by a variety of factors, such as the compressor or fan motor. Ensure the refrigerator is level and not touching any walls or cabinets. Check if any loose items are vibrating inside.
To defrost the freezer, remove all items and unplug the refrigerator. Leave the freezer door open to allow ice to melt naturally. Use towels to absorb excess water. Clean and dry the interior before plugging back in.
Check if the water filter is clogged and replace if necessary. Ensure the water supply line is connected and not kinked. Also, check if the dispenser lock is activated and deactivate it if needed.
To adjust the shelves, tilt the shelf upward to disengage the back hooks from the support tabs, then pull the shelf out. Reinsert it at the desired height and ensure it is level and secure.
It's recommended to clean the interior of your refrigerator every 3 to 4 months. Remove all food items, shelves, and drawers, and use a mild detergent with warm water to wipe down all surfaces.