Kenmore 73302 111.7303 Energy Guide
![Kenmore 73302 111.7303 Refrigerator manual cover](/images/efvaTNdfVZvHltMwpGbHSnVD/thumbs/thumb175x175.webp)
To adjust the temperature, locate the temperature control panel inside the refrigerator. Use the up or down arrows to set the desired temperature for both the fridge and freezer compartments.
Check if the vents inside the fridge are blocked by food items. Ensure the door seals are clean and free of debris. Also, verify that the temperature settings are correct. If the issue persists, consider contacting a service technician.
It is recommended to clean the condenser coils at least twice a year to ensure efficient operation. Use a vacuum or a coil brush to remove dust and debris.
To defrost the freezer, remove all food items and unplug the refrigerator. Leave the freezer door open to allow the ice to melt. Use towels to absorb the water and clean the interior once defrosted.
Find the water filter compartment, usually located inside the fridge near the top. Twist the old filter counterclockwise and pull it out. Insert the new filter and twist it clockwise until it is secure.
Water pooling can be due to a blocked defrost drain. Check the drain for any obstructions and clear them. Ensure the refrigerator is level to prevent water from accumulating.
Yes, the door swing can be reversed. Consult the user manual for detailed instructions as it involves removing and reattaching hinges and handles.
Use an appliance bulb with the same specifications as the original. Typically, a 40-watt appliance bulb is recommended. Check the user manual for exact details.
To reset the ice maker, turn off the ice maker using the control switch. Wait a few minutes, then turn it back on. This can help resolve minor issues.
Regularly clean the condenser coils, check and replace water filters as needed, ensure door seals are clean and intact, and defrost the freezer if necessary. Perform these tasks to maintain optimal performance.