Kenmore 73109 795.7310 Use and Care Guide
![Kenmore 73109 795.7310 Refrigerator manual cover](/images/DXDFtgRjrkzVMbNUiFFwKexY/thumbs/thumb175x175.webp)
To reset the water filter indicator light, press and hold the 'Reset' button on the control panel for about 3 seconds until the light turns off.
Ensure the vents inside the fridge are not blocked, check the temperature settings, and clean the condenser coils. If the problem persists, consider checking the door seals or consulting a technician.
Condenser coils should be cleaned every 6 to 12 months to ensure optimal performance.
The recommended temperature setting for the refrigerator compartment is 37°F (3°C) and 0°F (-18°C) for the freezer compartment.
Check the water supply line for kinks, ensure the ice maker is turned on, and verify that the freezer temperature is set correctly. If the issue continues, inspect the ice maker for jams or consult a technician.
Water pooling can be caused by a blocked defrost drain. Try clearing the drain hole located at the back of the fridge compartment.
Locate the water filter compartment, usually inside the fridge, turn the old filter counterclockwise to remove it, and insert the new filter by turning it clockwise until it locks in place.
Check for obstructions, ensure the fridge is level, and inspect the door seals for damage. Replace the seals if necessary.
To adjust the shelves, tilt the front up slightly, lift the shelf out, and reposition it at the desired height. Ensure the shelves are securely placed on the support brackets.
Unusual noises could be due to the refrigerator not being level, items inside vibrating, or the compressor working harder than usual. Ensure the fridge is level, rearrange items, and check for any loose components.