Kenmore 72795 795.7259 Energy Guide
![Kenmore 72795 795.7259 Refrigerator manual cover](/images/VpWWXahXvSQtJjHkoHumiXmI/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, typically in the upper right corner. Turn the old filter counterclockwise to release it. Insert the new filter and turn it clockwise until it is securely in place. Run water through the dispenser for a few minutes to clear any air or impurities.
Ensure the temperature settings are correct. Check for any obstructions in the vents inside the refrigerator. Make sure the door seals are clean and intact. Additionally, clean the condenser coils located at the back or bottom of the refrigerator. If the issue persists, consider contacting a professional technician.
First, ensure that the ice maker is turned on and the water supply is connected. Check for any ice jams or blockages in the ice maker unit. If these steps do not resolve the issue, try resetting the ice maker by turning it off and then on again. If the problem continues, a service technician may be needed.
It is recommended to clean the condenser coils at least twice a year. This helps maintain efficient operation and prolongs the life of the refrigerator. Use a vacuum or a coil brush to remove dust and debris from the coils.
Keep frequently used items within easy reach. Store similar items together, such as dairy products on one shelf and beverages on another. Use clear bins to organize small items, and adjust the shelves to accommodate taller items like bottles. This helps maximize space and ensures optimal airflow.
Regularly clean the interior with a mixture of baking soda and water. Store food in airtight containers and promptly remove any expired items. Placing an open box of baking soda inside the refrigerator can also help absorb odors.
Check the drain tube for blockages, which can cause water to pool due to improper drainage. Clean the tube using warm water and a small brush. Ensure that the refrigerator is level, as an uneven surface can also cause drainage issues.
Unusual noises can be caused by a variety of factors. Check for loose items on the shelves that may be vibrating. Ensure the refrigerator is level and not touching the wall or cabinets. If the noise persists, the fan or compressor might need inspection by a technician.
To reset the control panel, unplug the refrigerator from the power source for about 5 minutes and then plug it back in. This power cycle can help resolve minor glitches in the control panel.
To manually defrost the freezer, remove all food items and unplug the refrigerator. Leave the freezer door open to allow the ice to melt naturally. Place towels to catch any water. Once defrosted, clean the interior with a mild detergent before plugging the unit back in.