Kenmore 72332 C60242 Use and Care Guide
![Kenmore 72332 C60242 Dryer manual cover](/images/SfiFLLwSkGrnktwPQYWtqbjS/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the filter inside the door frame. Pull the filter straight up, remove the lint by hand, and rinse under warm water if necessary. Ensure it is completely dry before reinserting it.
First, ensure the dryer is plugged in and the circuit breaker is not tripped. Check that the door is fully closed. If the problem persists, inspect the start switch or consult a technician.
Ensure the dryer is on a heat setting and not on 'Air Fluff'. Check the thermal fuse, heating element, and thermostats for faults. If any are defective, they may need to be replaced.
Regular maintenance should be performed every 6-12 months. This includes cleaning the lint filter, inspecting the vent system, and checking for any unusual noises or vibrations.
Promptly remove clothes from the dryer at the end of the cycle. Use the 'Wrinkle Guard' feature if available, and consider using fabric softener sheets.
Check for any loose items like coins or buttons in the drum. Inspect the drum rollers, idler pulley, and blower wheel for wear. Tighten any loose screws or fasteners.
Yes, the door swing can be reversed. Consult the user manual for detailed instructions or contact a professional technician to ensure proper installation.
Check if the lint filter is clean and the venting system is clear of obstructions. Verify that the dryer is not overloaded and try a different drying cycle.
Use fabric softener sheets or a liquid fabric softener in the wash. Alternatively, add a damp washcloth or use dryer balls during the drying cycle.
To reset the dryer, unplug it from the power source for about 5 minutes. Reconnect the power and try restarting the dryer. If issues persist, consult the user manual or a technician.