Kenmore 71323 Energy Guide
![Kenmore 71323 Refrigerator manual cover](/images/cwagIRLmerDtyMZDUgXvootS/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it is secure. Run water through the dispenser for a few minutes to clear any air and impurities.
First, check if the refrigerator is plugged in and the thermostat is set correctly. Ensure the vents inside the fridge are not blocked by food items. Clean the condenser coils located at the back or beneath the unit. If the problem persists, consider contacting a professional technician.
Check the water filter for proper installation. Inspect the water line for any kinks or leaks. If the issue continues, the water valve may need replacement.
Noises may be due to the refrigerator being unlevel, causing vibrations. Ensure it is on a stable surface. Noises can also come from the compressor or fans, which may require professional servicing if they sound unusual.
It's recommended to clean the condenser coils every 6 to 12 months to ensure optimal performance and energy efficiency.
Set the refrigerator compartment to 37°F (3°C) and the freezer to 0°F (-18°C) for optimal food preservation.
Ensure the door seals are tight and not damaged. Keep the refrigerator and freezer full but not overcrowded. Regularly clean the condenser coils and avoid placing the unit near heat sources.
Check if the ice maker is turned on and the water supply is connected. Inspect the water line for any blockages. If these solutions do not work, the ice maker may require repair or replacement.
It's best to let hot food cool down to room temperature before storing it in the refrigerator to avoid raising the internal temperature and causing the appliance to work harder.
To reset the temperature alarm, press the alarm reset button on the control panel. If the alarm continues, check the temperature settings and ensure the doors are fully closed.