Kenmore 70812 253.6081 Energy Guide

To reset the temperature settings, press and hold the 'Temp' button on the control panel until the desired temperature is displayed. Release the button to set the new temperature.
First, check that the refrigerator is plugged in and the circuit breaker is not tripped. Ensure that the temperature settings are correct and the vents are not blocked. Clean the condenser coils and ensure that the door seals are intact.
Locate the water filter compartment, usually at the top right corner inside the fridge. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks in place. Run water through the dispenser for a few minutes to clear any air.
It is recommended to clean the condenser coils every 6 months, replace the water filter every 6 months, and inspect the door seals monthly for any damage or debris.
Unusual noises can be caused by the refrigerator not being level, items inside vibrating, or a malfunctioning fan or compressor. Ensure the refrigerator is level and check for loose items. If the noise persists, consider contacting a technician.
To manually defrost the freezer, unplug the refrigerator and remove all food items. Leave the freezer door open and place towels to absorb water. Once defrosted, clean the interior and plug the refrigerator back in.
Ensure the refrigerator is placed away from heat sources, keep the doors closed as much as possible, and maintain the recommended temperature settings. Regularly clean the condenser coils and ensure the door seals are tight.
Keep the refrigerator well-organized to allow air circulation, avoid overloading it, and ensure that the door seals are clean and intact. Regular maintenance, such as cleaning the coils, also improves efficiency.
Ensure the ice maker is turned on and the water supply line is connected and not blocked. Check the ice maker's temperature setting and make sure the freezer is cold enough. If the problem persists, inspect for any ice blockages or consider replacing the water filter.
Unplug the refrigerator and remove all food items. Use a mixture of baking soda and water to wipe down the interior surfaces. Rinse with a clean, damp cloth and dry thoroughly before plugging the refrigerator back in and returning the food.