Kenmore 70447 253.7034 Use and Care Guide
![Kenmore 70447 253.7034 Refrigerator manual cover](/images/CxJDyWIlLSEumYkilLPXGLDc/thumbs/thumb175x175.webp)
To change the water filter, turn off the water supply, locate the filter compartment in the refrigerator, twist the old filter counterclockwise to remove it, and install the new filter by twisting it clockwise until it locks into place.
First, check if the thermostat is set to the correct temperature. Ensure the vents inside the refrigerator are not blocked. Clean the condenser coils and check the door seals for any gaps or damage.
To reset the ice maker, locate the on/off switch on the ice maker unit, turn it off for a few minutes, and then turn it back on. Alternatively, press the reset button if available on your model.
Water leakage inside the refrigerator can be caused by a blocked defrost drain. To fix this, clear any debris from the drain hole using a pipe cleaner or a similar tool.
It's recommended to clean the condenser coils every six months to ensure efficient operation and prevent overheating.
Use a 40-watt appliance bulb for the refrigerator. Ensure the bulb is rated for appliance use to withstand low temperatures.
To level the refrigerator, adjust the leveling legs located at the bottom front. Turn the legs clockwise to raise the refrigerator or counterclockwise to lower it until it is stable.
Unusual noises can be due to the refrigerator not being level or items inside vibrating. Ensure the refrigerator is on a level surface and rearrange items inside to prevent them from touching the walls.
Yes, but ensure the garage is insulated and temperatures remain within the refrigerator's operating range. Extreme temperatures can affect performance.
To manually defrost, unplug the refrigerator, remove all food items, and leave the doors open. Use towels to absorb water as the ice melts. Once defrosted, clean and dry the interior before plugging it back in.