Kenmore 70417 253.7034 Energy Guide

To adjust the temperature, locate the temperature control panel inside the refrigerator. Use the buttons to set your desired cooling level. The ideal refrigerator temperature is around 37°F (3°C) and the freezer should be at 0°F (-18°C).
First, ensure that the refrigerator is plugged in and the circuit breaker is not tripped. Check the temperature settings and make sure the vents inside the fridge are not blocked. If the issue persists, inspect the door seals and clean the condenser coils.
It is recommended to clean the condenser coils every 6 months. This helps maintain energy efficiency and ensures optimal cooling performance.
To defrost the freezer, first remove all items and unplug the refrigerator. Leave the freezer door open to allow the ice to melt naturally. You can place towels on the floor to absorb water. Once defrosted, clean and dry the interior before plugging the unit back in.
Unusual noises can result from a variety of issues such as the compressor, fan, or evaporator malfunctioning. Ensure the refrigerator is level and not touching the wall or other surfaces. If the noise persists, consider contacting a service technician.
Locate the water filter compartment, usually inside the refrigerator. Turn the filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser for a few minutes to clear any air or impurities.
Check the ice maker switch to ensure it is turned on. Verify that the water line is connected and not frozen. If there is no ice production, reset the ice maker or consult the user manual for further troubleshooting steps.
To clean the interior, unplug the refrigerator and remove all food items. Use a solution of mild soap and water to wipe down the shelves, drawers, and walls. Rinse with clean water and dry thoroughly before replacing the food items.
This could be due to a blocked defrost drain. Try clearing the drain by flushing it with warm water. If the problem continues, inspect the drain tube for obstructions or damage.
Keep the refrigerator away from heat sources and ensure adequate ventilation. Regularly clean the condenser coils and check door seals for leaks. Avoid overloading the fridge, and keep the door closed as much as possible to maintain temperature.