Kenmore 70357 795.7035 Use and Care Guide
![Kenmore 70357 795.7035 Refrigerator manual cover](/images/ZRbHYyIZZohbPwbVXunmxRvP/thumbs/thumb175x175.webp)
To reset the water filter indicator, press and hold the "Filter Reset" button for 3 seconds until the indicator light turns off.
Ensure the refrigerator is plugged in and the temperature settings are correct. Check if the vents are blocked and clean the condenser coils if needed.
The water filter should be replaced every 6 months or when the water flow decreases noticeably.
Ensure the ice maker is turned on and connected to the water supply. Check for any ice blockages and reset the ice maker if necessary.
Unplug the refrigerator and locate the condenser coils, usually at the back or bottom. Use a vacuum with a brush attachment to clean off dust and debris.
The ideal temperature setting for the refrigerator compartment is 37°F (3°C), and for the freezer, it is 0°F (-18°C).
Check if the water filter is installed correctly and inspect water lines for leaks. Ensure the defrost drain is not clogged.
It is recommended to allow hot food to cool to room temperature before storing it in the refrigerator to prevent temperature fluctuations.
The Kenmore 70357 refrigerator is typically frost-free and does not require manual defrosting. If ice builds up, check the door seals and defrost drain.
Ensure the refrigerator is level and not touching any walls or cabinets. Check if items inside are vibrating, and inspect the fan and compressor for issues.