Kenmore 69339 111.6933 Energy Guide
![Kenmore 69339 111.6933 Refrigerator manual cover](/images/lHkhXRASpOlMHCDnfZXEVUZE/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrows to set your desired temperature for both the fridge and freezer compartments.
First, check that the refrigerator is plugged in and that the circuit breaker is not tripped. Ensure that the vents inside the fridge are not blocked and the door seals are clean and sealing properly. If the issue persists, consider contacting a professional technician.
It's recommended to clean the condenser coils at least twice a year to maintain efficient operation. Use a vacuum or a coil brush to remove dust and debris.
To defrost the freezer, remove all items and unplug the refrigerator. Leave the freezer door open to allow for natural thawing. Once the ice has melted, clean any residual water and plug the unit back in.
Locate the water filter compartment, usually at the upper right corner of the fridge. Twist the old filter counterclockwise to remove it. Insert the new filter and twist it clockwise until it's secure. Run water through the dispenser for a few minutes to clear any air or impurities.
Unusual noises can result from the fridge being unlevel, items inside vibrating, or the compressor cycling on and off. Ensure the fridge is level, rearrange items to ensure nothing is touching the sides, and check that the compressor is functioning normally.
Check that the ice maker is turned on and that the water supply line is connected and not blocked. Ensure the freezer is cold enough to produce ice. If the problem persists, the ice maker may need servicing or replacement.
To reset the refrigerator, unplug the unit for about 5 minutes, then plug it back in. This should reset the control panel. If issues continue, consult the user manual or contact support.
Yes, the doors on the Kenmore 69339 are reversible. Follow the instructions in the user manual to switch the hinge locations. Make sure to have all necessary tools and assistance if needed.
Ensure that the fridge is placed away from heat sources and direct sunlight. Keep the doors closed as much as possible, and make sure the seals are tight. Regularly clean the condenser coils and set the temperature to the recommended settings.