Kenmore 60715 111.7121 Energy Guide
![Kenmore 60715 111.7121 Refrigerator manual cover](/images/NapgpmARBbhYlhLeThHvqWkJ/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, twist the old filter counterclockwise to remove it, and insert the new filter by twisting it clockwise until it is securely in place.
Ensure that the temperature settings are correct, the door seals are intact, and the vents inside the refrigerator are not blocked by food items. If the issue persists, check the condenser coils for dust and clean them if necessary.
To reset the ice maker, turn off the refrigerator for a few minutes, then turn it back on. Alternatively, you can press the test button on the ice maker to reset it.
Check if the defrost drain is clogged and clear any blockages. Ensure the water filter is installed correctly and not damaged. Also, verify that the water line connections are secure.
It is recommended to clean the condenser coils every 6 months to ensure optimal performance and efficiency of the refrigerator.
Check for obstructions around the door seal, ensure the refrigerator is level, and adjust the door hinges if necessary to ensure a tight seal.
Locate the temperature control panel inside the refrigerator and adjust the settings using the control knobs or buttons to achieve the desired temperature.
Ensure that the refrigerator is level and not in contact with surrounding cabinets. Check the condenser fan and evaporator fan for obstructions or damage.
Keep the refrigerator doors closed as much as possible to maintain the cold temperature for several hours. Once the power is restored, check the food for spoilage before consumption.
To manually defrost, remove all food, unplug the refrigerator, and leave the doors open to allow ice to melt. Clean up any water before plugging the refrigerator back in.