Kenmore 60519 111.6121 Energy Guide
![Kenmore 60519 111.6121 Refrigerator manual cover](/images/cFUZVFFQkpDOHLibzrcHFyOQ/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel inside the refrigerator. Turn the dial to the desired setting, usually from 1 (least cold) to 5 (coldest). Allow 24 hours for the temperature to stabilize.
First, check if the refrigerator is plugged in and the power is on. Ensure the door seals are clean and airtight. Check temperature settings and clear any obstructions in the vents. If issues persist, contact a technician.
You should clean the condenser coils every 6 months. Unplug the refrigerator, use a vacuum cleaner with a brush attachment to remove dust and debris from the coils, typically located at the back or beneath the unit.
Noises can result from a variety of issues such as the compressor, fans, or ice maker. Check if the refrigerator is level and ensure it is not touching the wall or cabinets. If noises persist, contact a technician.
Locate the water filter compartment, usually in the upper right corner. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it is snug. Run water through the dispenser to clear any air.
To defrost, remove all food items and unplug the refrigerator. Leave the freezer door open and place towels around to absorb water. Once defrosted, clean and dry the interior before plugging it back in.
Keep the refrigerator full, but not overcrowded, to maintain temperature stability. Ensure door seals are intact, set the temperature to recommended settings, and clean the condenser coils regularly.
Check if the bulb is burnt out and replace it with a new one. Ensure the refrigerator is plugged in and the door switch is functioning. If the issue persists, contact a technician.
Regularly clean the interior with a mixture of baking soda and water. Keep food covered and dispose of expired items promptly. Placing an open box of baking soda inside can also help absorb odors.
Empty the refrigerator, unplug it, and clean the interior. Leave the doors slightly open to prevent mold growth. If leaving the unit on, adjust the temperature to a warmer setting and discard perishable items.