Kenmore 60222 C60222 Use and Care Guide
![Kenmore 60222 C60222 Dryer manual cover](/images/KZVUxZNAAyIbHtvjfCCOoQJG/thumbs/thumb175x175.webp)
The Kenmore 60222 C60222 Dryer has dimensions of 29 inches in width, 43 inches in height, and 28 inches in depth.
To clean the lint filter, open the dryer door, pull the filter out of its slot, and remove the lint by hand or with a soft brush. Make sure to clean the filter after every cycle to ensure optimal performance.
If the dryer is not heating, check if the dryer is getting power and ensure the circuit breaker is not tripped. Additionally, inspect the thermal fuse and heating element for continuity with a multimeter. Replace any faulty components if necessary.
To prevent wrinkles, promptly remove clothes from the dryer at the end of the cycle. You can also use the permanent press cycle, which incorporates a cool-down period to reduce wrinkles.
The Kenmore 60222 dryer has a capacity of 6.5 cubic feet, which is suitable for handling medium to large laundry loads.
If the dryer won't start, ensure it is plugged in and the door is fully closed. Check the start switch, door switch, and thermal fuse for continuity using a multimeter. Replace any defective parts as needed.
Regularly clean the lint filter and vent system to prevent blockages. Inspect the drum belt, rollers, and pulleys for wear and replace them if needed. Also, check the exhaust vent for any obstructions periodically.
A squeaking noise may indicate a worn drum roller, idler pulley, or drum bearing. Inspect these components and replace any that show signs of wear or damage.
The Kenmore 60222 is not designed to be stackable. It is a standalone unit that should be installed side-by-side with a compatible washer.
To adjust the leveling legs, tilt the dryer slightly and rotate the legs clockwise or counterclockwise to raise or lower the dryer. Ensure the dryer is level to prevent excessive noise and vibration during operation.