Kenmore 60112 Energy Guide
![Kenmore 60112 Refrigerator manual cover](/images/oBmxQzVOuGTyYLYUhZSCQieF/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, twist the old filter counterclockwise to remove it, insert the new filter, and twist it clockwise until it locks in place. Run water through the dispenser for a few minutes to clear any air.
If your refrigerator is not cooling, check if the vents are blocked by food items, ensure the temperature settings are correct, and clean the condenser coils at the back or bottom of the fridge to improve efficiency.
To defrost the freezer, remove all food items, unplug the refrigerator, and leave the freezer door open. Place towels to absorb water as the ice melts. Once defrosted, clean and dry the interior before plugging it back in.
Check if the ice maker is turned on, ensure the water line is not kinked or clogged, and inspect the water inlet valve. If issues persist, resetting the ice maker or consulting the user manual may help.
It's recommended to clean the condenser coils every six months to ensure efficient operation and to prevent overheating. Use a vacuum cleaner or a coil brush for best results.
The ideal temperature for the refrigerator section is between 37°F and 40°F, while the freezer should be set at 0°F for optimal food preservation.
Water leaks can be caused by a blocked defrost drain, a damaged water line, or a faulty water filter. Ensure the drain is clear, inspect the water line for damage, and verify the filter is properly installed.
To replace the light bulb, unplug the refrigerator, locate the bulb cover, and remove it by twisting or snapping it off. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Unusual noises can be due to a vibrating compressor, loose parts, or ice buildup. Ensure the refrigerator is level, check for loose screws or panels, and defrost if necessary to eliminate ice buildup.
To maximize energy efficiency, keep the refrigerator full but not overcrowded, ensure door seals are tight, maintain appropriate temperature settings, and clean the condenser coils regularly.