Kenmore 60022 253.7030 Use and Care Guide
![Kenmore 60022 253.7030 Refrigerator manual cover](/images/ZYXulsUfQVIuGrrCgYOqvele/thumbs/thumb175x175.webp)
To adjust the temperature settings, use the temperature control dial inside the refrigerator. Turn it clockwise to lower the temperature and counterclockwise to increase it. Allow 24 hours for the changes to take full effect.
Check the temperature settings and ensure the refrigerator is not overloaded. Clean the condenser coils and ensure the door seals are tight. If the issue persists, consider contacting a professional technician.
The freezer section is frost-free, so it should not require manual defrosting. However, if frost builds up, check the door seal and ensure proper air circulation inside the unit.
Use a soft cloth with mild detergent and water to clean the interior and exterior. Avoid using abrasive cleaners or sharp objects. Remove shelves and drawers for easier cleaning and wash them separately.
Ensure the refrigerator is level and not touching the wall or cabinets. Check that nothing inside is vibrating. Some noises are normal, like the sound of the compressor or defrost cycle.
This could be due to a clogged defrost drain. Clear the drain using a turkey baster filled with warm water. Make sure the drain tube is not blocked and that the door seals are tight.
To replace the light bulb, unplug the refrigerator, remove the light cover, and unscrew the old bulb. Replace it with a new bulb of the same wattage and type, then replace the cover and plug the unit back in.
Check for obstructions or misaligned shelves inside the refrigerator. Inspect the door seals for damage or dirt, and clean or replace them if necessary. Ensure the refrigerator is level.
Keep the refrigerator away from heat sources and ensure adequate ventilation around it. Keep the doors closed as much as possible and ensure the seals are intact. Regularly clean the condenser coils.
It is normal for modern refrigerators to run more frequently to maintain temperature. However, if it runs constantly without stopping, check the door seals and temperature settings, and ensure proper ventilation.