Kenmore 51863 795.5185 Energy Guide
![Kenmore 51863 795.5185 Refrigerator manual cover](/images/aRSqxhpvHccpCTEFvbDMWLkM/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator. Turn the filter counterclockwise to release it. Insert the new filter and turn it clockwise until it locks into place. Run water through the dispenser for a few minutes to clear the system.
Check to ensure the refrigerator is plugged in and the thermostat is set to the correct temperature. Clean the condenser coils if they are dirty. Verify that the door seals are intact and sealing properly. If the problem persists, consult a technician.
To reset the ice maker, turn off the refrigerator for a few minutes and then turn it back on. Locate the ice maker's reset button, typically near the ice maker unit, and press it for a few seconds. The ice maker should begin to cycle.
Water leakage inside the refrigerator could be due to a blocked defrost drain. Check and clear any obstructions in the drain tube. Ensure the refrigerator is leveled properly to avoid water pooling.
It is recommended to clean the condenser coils every 6 months to ensure efficient operation. Use a vacuum or coil brush to remove dust and debris from the coils.
The ideal temperature setting for the refrigerator compartment is between 37°F and 40°F (3°C and 4°C), and for the freezer compartment, it should be set at 0°F (-18°C).
Unusual noises could be due to the fan or compressor. Check if the refrigerator is leveled and that internal components are not vibrating against each other. If noises persist, it may require a professional inspection.
To manually defrost the freezer, remove all items and unplug the refrigerator. Leave the freezer door open to allow the ice to melt naturally. Use towels to absorb water and dry the interior before plugging the refrigerator back in.
First, check if the bulb is loose or burnt out and replace it if necessary. Ensure the power supply is consistent. If the light still does not work, check the light switch or contact a technician for further assistance.
To improve energy efficiency, ensure the door seals are intact, keep the refrigerator away from heat sources, and avoid overloading it. Regularly clean the condenser coils and set the temperature to the recommended settings.