Kenmore 51773 106.5177 Energy Guide
![Kenmore 51773 106.5177 Refrigerator manual cover](/images/EFUxkpRKBKpScwMxQivNRvrI/thumbs/thumb175x175.webp)
To adjust the temperature, locate the digital temperature control panel inside the refrigerator. Use the up and down arrows to set your desired temperature for both the refrigerator and freezer compartments.
Check to ensure that the vents inside the refrigerator are not blocked by food items. Make sure the door seals are clean and sealing properly. Also, verify that the temperature settings are correctly set. If the issue persists, consider contacting a professional technician.
It is recommended to clean the condenser coils at least every six months to ensure optimal performance and energy efficiency.
To replace the water filter, locate the filter compartment inside the refrigerator. Turn off the water supply, remove the old filter by twisting it counterclockwise, and install the new filter by twisting it clockwise until it locks in place. Turn the water supply back on and run water through the new filter for a few minutes to clear any air or impurities.
To reset the ice maker, locate the on/off switch or button on the ice maker unit. Turn it off, wait a few seconds, and then turn it back on. This can help resolve minor issues with ice production.
Water pooling can be caused by a blocked defrost drain. To resolve this, clear any debris or ice buildup from the drain located at the back of the refrigerator compartment.
Yes, the door swing can be reversed. Consult the user manual for detailed instructions, as it involves removing the door, hinges, and handles, and reinstalling them on the opposite side.
Unusual noises can be caused by a variety of issues. Check to ensure the refrigerator is level and that nothing inside is vibrating against the walls. If the noise persists, it may be a sign of a mechanical issue requiring professional service.
To activate energy-saving mode, press the "Energy Saver" button on the control panel. This setting helps reduce energy consumption by optimizing cooling cycles.
Use a mixture of mild soap and warm water to clean the interior surfaces. Avoid using harsh chemicals or abrasive cleaners. Rinse thoroughly with clean water and dry with a soft cloth.