Kenmore 51339 Energy Guide
![Kenmore 51339 Refrigerator manual cover](/images/hrzXBEzQVlwzIpeuerDOPRAP/thumbs/thumb175x175.webp)
To reset the temperature settings, press the temperature control button on the display panel. Adjust the settings to your desired temperature level for both the refrigerator and freezer compartments.
Check if the vents are blocked and ensure that the door seals are clean and intact. Also, verify that the temperature settings are correct and that the condenser coils are clean.
It is recommended to clean the condenser coils every six months to maintain optimal performance and efficiency.
Possible causes include a clogged defrost drain, a faulty water inlet valve, or a damaged water filter. Inspect these components and replace or repair as needed.
Locate the water filter compartment, twist the old filter counterclockwise to remove it, and install the new filter by twisting it clockwise until it locks into place.
Frost buildup can occur due to a malfunctioning defrost system, frequent door openings, or damaged door seals. Check these areas for issues.
To adjust the shelves, tilt the shelf up at the front and lift it out of the shelf tracks. Move it to your desired height and slide it back into the tracks.
Ensure the ice maker is turned on and that the water supply line is connected and not kinked. Also, inspect the ice maker components for any signs of damage or blockage.
Use a mixture of mild soap and warm water to wipe down the interior surfaces. Rinse with clean water and dry with a soft cloth. Avoid using abrasive cleaners.
Unusual noises can result from a vibrating condenser fan, a faulty compressor, or items inside the refrigerator that are not properly secured. Inspect these areas to identify the source of the noise.