Kenmore 41173 106.4112 Energy Guide

To reset the temperature settings, press the "Freezer" or "Fridge" button on the control panel until you reach the desired temperature. The recommended setting is 37°F for the fridge and 0°F for the freezer.
Ensure the vents inside the fridge are not blocked by food items, and check the condenser coils for dust and debris, cleaning them if necessary. Also, verify that the door seals are intact and sealing properly.
Locate the water filter compartment, usually at the base grille or inside the refrigerator. Turn the filter counterclockwise to remove it, then insert and turn the new filter clockwise until it clicks into place.
To defrost manually, unplug the refrigerator, remove all items, and keep the door open to allow ice to melt. Use towels to soak up water. Do not use sharp objects to remove ice.
Check if the refrigerator is level, as uneven surfaces can cause noise. Inspect the fan and condenser coils for obstructions or wear. Tighten any loose components and ensure the fridge is not touching walls or cabinets.
Clean the condenser coils every 6 to 12 months to maintain efficient operation. Use a vacuum or brush to remove dust and debris.
Water leaking can be due to a blocked defrost drain. Clear the drain hole located at the back of the refrigerator using warm water and a small brush. Ensure the drain tube is not clogged.
To adjust shelves, remove food items, lift the front of the shelf and pull it out. Insert the shelf at the desired height by tilting the front up and placing it on the supports.
Ensure the ice maker is turned on and the water supply is connected. Check for any ice blockages in the tray and verify the freezer is cold enough to produce ice.
Ensure the refrigerator is not overloaded, maintain a consistent temperature setting, regularly clean the condenser coils, and check the door seals for leaks.