Kenmore 41133 106.4115 Energy Guide
![Kenmore 41133 106.4115 Refrigerator manual cover](/images/hWPtadrhVmEMFlsLqWRtZyLx/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the up and down arrows to set your desired temperature for both the refrigerator and the freezer compartments.
If the refrigerator is not cooling, check to ensure that the vents inside the refrigerator and freezer are not blocked. Additionally, make sure the door seals are clean and intact. If the problem persists, consider defrosting the unit and restarting it.
It is recommended to clean the condenser coils every six months to ensure optimal performance. Use a vacuum or a brush to remove dust and debris from the coils.
To defrost the freezer, turn off the refrigerator and remove all items from the freezer compartment. Leave the freezer door open and allow the ice to melt naturally. Use towels to absorb the water and clean the interior before restarting the appliance.
To change the water filter, locate the filter compartment inside the refrigerator. Turn the old filter counterclockwise to remove it and insert the new filter by turning it clockwise until it is secure. Run water through the dispenser for about 5 minutes to clear any air and impurities.
If your refrigerator is making a loud noise, it could be due to an uneven surface, causing vibration. Ensure the appliance is level. If the noise persists, check the condenser fan and evaporator fan for obstructions or wear.
To reset the ice maker, locate the on/off switch or reset button on the ice maker unit, usually inside the freezer compartment. Turn it off for a few minutes, then turn it back on.
If the door is not closing properly, check if the shelves or bins are obstructing the door. Also, inspect the door gasket for any damage or dirt. Cleaning or replacing the gasket might resolve the issue.
To improve energy efficiency, ensure the refrigerator is not overloaded, which can block air circulation. Regularly clean the condenser coils and ensure the door seals are intact. Setting the refrigerator to the manufacturer's recommended temperature can also help.
Regular maintenance includes cleaning the condenser coils, checking and cleaning door seals, replacing the water filter every six months, and ensuring the refrigerator is level. These steps help maintain optimal performance and efficiency.