Kenmore 2644432K 110.4443 Energy Guide
![Kenmore 2644432K 110.4443 Washing Machine manual cover](/images/NXjSRadYqIYojeOXnhwqaXHd/thumbs/thumb175x175.webp)
To reset the Kenmore washing machine, unplug it from the power outlet for a few minutes. After plugging it back in, press the Start button to reset the control board.
Check if the drain hose is clogged or kinked. Ensure that the drain pump is functioning and clean out any debris from the pump filter.
Loud noises during the spin cycle could be due to an unbalanced load. Make sure the laundry is evenly distributed. Also, check for any loose or worn-out drum bearings.
This model does not have a traditional lint filter. Instead, it uses a self-cleaning pump to remove lint during the wash cycle. Ensure the pump area is clear of obstructions.
Regularly clean the detergent dispenser, run a cleaning cycle with vinegar or a washing machine cleaner, and check hoses for any signs of wear or leaks.
Leave the door open after each wash to allow the interior to dry. Regularly clean the door gasket and run a monthly cleaning cycle with bleach or a washing machine cleaner.
Ensure the door is fully closed and latched. Check if the control panel is locked or if there are any error codes displayed. Verify the power supply.
Inspect the door seal for damage, check hose connections for leaks, and ensure the detergent drawer is not overfilled.
If the machine is not spinning, ensure the lid is properly closed and the load is balanced. Check for any error codes indicating a malfunction.
Use the appropriate amount of detergent, avoid overloading the machine, and select the correct cycle for the type of laundry. Regular maintenance can also enhance efficiency.