Kenmore 14715 665.1471 Use and Care Guide

To reset the dishwasher, press the "Heated Dry" button followed by the "Normal Wash" button, then press "Heated Dry" again and "Normal Wash" again. This sequence should reset the control panel.
Check if the drain hose is kinked or clogged. Also, inspect the filter and sump for any debris. If these are clear, the problem might be with the drain pump or motor.
You should clean the filter every month to ensure optimal performance and prevent clogs.
Place larger items like pots and pans on the bottom rack, and smaller items on the top rack. Ensure that nothing blocks the spray arms and that all items are dishwasher-safe.
Make sure to use a rinse aid, which helps water to sheet off dishes. Also, select the "Heated Dry" option for better drying results.
Check the door gasket for damage or debris and ensure it seals properly when closed. Also, ensure that the dishwasher is level and the drain hose is correctly installed.
Ensure that the spray arms are not clogged and can rotate freely. Check that the detergent dispenser is working properly and that you are using the correct type and amount of detergent.
Regular maintenance includes cleaning the filter, checking the spray arms for blockages, and inspecting the door gasket for wear or damage.
Refer to the user manual for the specific error code. Most errors can be resolved by checking for blockages, ensuring proper water supply, or resetting the dishwasher.
For heavily soiled dishes, use the "Heavy" or "Pots & Pans" cycle for a more intensive wash. Ensure that heavily soiled items are placed on the bottom rack.