Kenmore 14422 665.1300 Use and Care Guide
![Kenmore 14422 665.1300 Dishwasher manual cover](/images/eIySfCTVBIvxzJFDrseyqnps/thumbs/thumb175x175.webp)
To reset your Kenmore dishwasher, press the "Heated Dry" button, then the "Normal Wash" button, then the "Heated Dry" button, and again the "Normal Wash" button. This sequence should reset your dishwasher.
Check for clogs in the drain hose, filters, or garbage disposal. Also, ensure that the dishwasher's drain pump is functioning correctly.
Ensure that the spray arms are not clogged and can rotate freely. Check that the detergent is fresh and the water temperature is at least 120°F.
Remove the bottom rack, take out the filter by turning it counterclockwise, rinse it under running water, and reinstall it by turning it clockwise.
Unusual noises can indicate loose items in the dishwasher, a malfunctioning pump, or worn-out motor bearings. Inspect and address these issues accordingly.
Regular maintenance, such as cleaning the filter and checking the spray arm, should be done monthly. Deep cleaning and hose inspections can be done bi-annually.
Leaks can be due to worn door seals, overfilling, or issues with the water inlet valve. Check these components and replace if necessary.
Use a rinse aid to enhance drying, ensure that the "Heated Dry" option is selected, and allow the dishwasher to complete the drying cycle without interruption.
This can be caused by hard water. Use a rinse aid and consider using a dishwasher cleaner to remove mineral deposits.
Ensure the door is fully closed and latched, the control panel is not locked, and the circuit breaker is not tripped. Also, check the power supply.