John Deere Gator XUV825M S4 Operator's Manual
![John Deere Gator XUV825M S4 Utility Vehicle manual cover](/images/bSxKuPwvweLkfjzLaWfWsULc/thumbs/thumb175x175.webp)
The recommended tire pressure for the John Deere Gator XUV825M S4 is typically 18 psi for both front and rear tires. Always refer to the owner's manual for the most accurate information.
To perform an oil change, ensure the vehicle is on a level surface, warm up the engine, and turn it off. Remove the drain plug to drain the oil, replace the oil filter, and refill with the recommended oil type and quantity.
Check the battery connections for corrosion and ensure they are tight. Verify the fuel level and ensure the fuel is fresh. Check the fuses and ensure the gear selector is in the correct position.
The air filter should be checked every 50 hours of operation and cleaned or replaced as necessary. More frequent checks may be required in dusty conditions.
The towing capacity of the John Deere Gator XUV825M S4 is approximately 1,500 lbs (680 kg). Always consult the owner's manual for specific guidelines and ensure safe towing practices are followed.
Start by checking the fuses and relays. Use a multimeter to check battery voltage, and inspect wiring harnesses for any signs of damage or loose connections.
The John Deere Gator XUV825M S4 is designed to run on unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends greater than E10.
To adjust the drive belt tension, locate the tensioner pulley and use a wrench to adjust the tensioner bolt. Ensure the belt has the proper deflection as specified in the service manual.
Common maintenance tasks include regular oil changes, air filter checks, spark plug inspection, tire pressure checks, and brake inspections. Always refer to the maintenance schedule in the owner's manual.
To improve fuel efficiency, ensure regular maintenance is performed, keep tires properly inflated, avoid excessive idling, and operate the vehicle at optimal speeds.