John Deere 2315RT, 1317RT, 2317RT, 1319RT and 1321RT Operator's Manual
![John Deere 2315RT, 1317RT, 2317RT, 1319RT and 1321RT manual cover](/images/924b12b5652ae711f0dc59dd/thumbs/thumb175x175.webp)
For the John Deere 2315RT, it is recommended to perform basic maintenance checks every 50 hours, including inspecting the air filter, checking the engine oil level, and lubricating all grease points. Additionally, a comprehensive service should be done every 500 hours.
If you are experiencing hydraulic issues with the John Deere 1317RT, first check the hydraulic fluid level and inspect for any leaks. Ensure that the hydraulic filter is clean. If the problem persists, it may be necessary to consult the service manual or contact a certified technician.
The John Deere 2317RT is designed to run on standard diesel fuel. It is important to use clean, high-quality diesel to ensure optimal performance and longevity of the engine.
To improve the fuel efficiency of your John Deere 1319RT, regularly maintain engine components, ensure tires are properly inflated, and avoid excessive idling. Adjusting driving habits to reduce rapid acceleration and maintaining steady speeds can also contribute to better fuel efficiency.
If the John Deere 1321RT engine fails to start, first check the battery connections and charge if necessary. Ensure there is enough fuel and the fuel filter is not clogged. Examine the starter motor and ignition system for faults. If the issue persists, consult a professional technician.
The air filter on a John Deere 2315RT should be inspected every 50 hours of operation and replaced if it appears dirty or damaged. It is generally recommended to replace the air filter every 200 hours, but this can vary based on operating conditions.
Common causes of overheating in a John Deere 1317RT include a low coolant level, a malfunctioning thermostat, a clogged radiator, or a failing water pump. Regular maintenance checks can help prevent these issues.
Yes, the John Deere 2317RT can run on biodiesel blends up to B20 (20% biodiesel, 80% petroleum diesel). Ensure the biodiesel meets ASTM D6751 or EN 14214 standards for quality.
To calibrate the steering system on a John Deere 1319RT, refer to the operator's manual for specific instructions, as it involves using onboard diagnostics and may require technical tools. It's advisable to have this done by a certified technician to ensure accuracy.
To check and adjust the belt tension on a John Deere 1321RT, first turn off the engine and disconnect the power. Inspect the belt for wear or damage, and use a belt tension gauge to ensure correct tension. Adjust the tensioner pulley as needed according to the guidelines provided in the service manual.