JennAir Noir JUBFL242HM Use and Care Guide
![JennAir Noir JUBFL242HM Refrigerator manual cover](/images/egOcSGedQRjsRCfdTMSUhDqE/thumbs/thumb175x175.webp)
To change the water filter, locate the filter compartment inside the refrigerator, turn the filter counterclockwise to remove it, and insert the new filter by turning it clockwise until it locks into place.
Check the temperature settings to ensure they are correct, inspect the door seals for any damage, and clean the condenser coils. If the problem persists, consider contacting a professional technician.
To adjust the shelves, gently lift the shelf and tilt it upwards to release it from the rear support. Move the shelf to the desired height and lower it onto the new support slots.
Water pooling can be caused by a blocked defrost drain. To fix this, locate the drain hole and clear any debris using a pipe cleaner or similar tool.
To reset the control panel, unplug the refrigerator from the power outlet for about 5 minutes, then plug it back in and allow the system to reboot.
Use a soft cloth dampened with warm water and a mild detergent. Wipe in the direction of the grain and avoid using abrasive cleaners or pads.
To activate Sabbath Mode, press and hold the Lighting and Power buttons simultaneously for 5 seconds. The display will indicate when Sabbath Mode is active.
Unusual noises can be caused by items inside the fridge vibrating or the compressor cycling. Ensure that the refrigerator is level and that items are not touching the walls.
To replace the light bulb, unplug the refrigerator, remove the light cover by lifting it, unscrew the old bulb, and replace it with a new one of the same wattage.
The refrigerator includes features such as LED lighting, efficient compressor technology, and precise temperature control to minimize energy consumption.