Jeep Grand Cherokee SRT 2014 Owner's Manual
![Jeep Grand Cherokee SRT 2014 SUV manual cover](/images/OMqyEBHRpuaKsGsfRazxDGPu/thumbs/thumb175x175.webp)
To reset the oil change indicator, turn the ignition to the "ON/RUN" position (do not start the engine), fully depress the accelerator pedal slowly three times within 10 seconds, and then turn the ignition to the "OFF" position.
The recommended oil for the 2014 Jeep Grand Cherokee SRT is SAE 0W-40 full synthetic engine oil.
The check engine light can illuminate due to various reasons, including a loose gas cap, faulty sensors, or other engine-related issues. It's advisable to use an OBD-II scanner to retrieve diagnostic trouble codes for accurate troubleshooting.
Improving fuel efficiency can be achieved by maintaining proper tire pressure, performing regular engine maintenance, using recommended oil, and avoiding aggressive driving habits.
The 2014 Jeep Grand Cherokee SRT has a towing capacity of up to 7,200 pounds when properly equipped.
To pair your phone, enable Bluetooth on your phone, press the 'Phone' button on the Uconnect system, select 'Add Device', and follow the prompts to complete the pairing process.
If the air suspension system fails, check for any visible damage or leaks. If no issues are found, a system reset might help. If the problem persists, consult a certified Jeep technician for a thorough inspection.
To replace the cabin air filter, open the glove box, remove the dampener cord, press in the sides of the glove box to drop it down, and access the filter cover. Remove the cover, replace the old filter with a new one, and reassemble.
The recommended tire pressure for the 2014 Jeep Grand Cherokee SRT is 36 psi for both front and rear tires.
To update the navigation system, visit the official Uconnect website to check for available updates, download the update to a USB drive, and follow the on-screen instructions after plugging the USB into the vehicle's port.