Jeep Grand Cherokee 2019 Owner's Manual
![Jeep Grand Cherokee 2019 SUV manual cover](/images/vLLVQuMzWahsyKJMXVRhvYBU/thumbs/thumb175x175.webp)
To reset the oil change indicator, turn the ignition to the "ON" position without starting the engine. Fully depress the accelerator pedal slowly three times within ten seconds, then turn the ignition off. The indicator should reset.
The recommended tire pressure for the 2019 Jeep Grand Cherokee is typically 36 PSI for both front and rear tires. However, always check the placard located on the driver's side door jamb for the most accurate information.
To pair your smartphone, enable Bluetooth on your device. On the Uconnect system, go to 'Phone' > 'Add Device'. Select your phone from the list, and confirm the PIN displayed on both the Uconnect screen and your phone.
The 2019 Jeep Grand Cherokee typically requires SAE 0W-20 or 5W-20 engine oil, depending on the engine type. Always refer to the owner's manual for the exact specification.
To change the cabin air filter, locate the filter housing behind the glove box. Open the glove box, remove the limiting arm, and depress the side walls to lower it completely. Open the filter cover, remove the old filter, and insert a new one.
If the check engine light comes on, check for any obvious issues like a loose fuel cap. If the light remains, it's advisable to use an OBD-II scanner to read the error code or visit a qualified mechanic for a diagnostic.
To improve fuel efficiency, ensure proper tire inflation, maintain regular vehicle servicing, avoid excessive idling, and use cruise control on highways when possible.
The towing capacity of the 2019 Jeep Grand Cherokee varies by engine type. The V6 engine can typically tow up to 6,200 pounds, while the V8 engine can tow up to 7,200 pounds. Always refer to the owner's manual for specific configurations.
The 4WD system in the 2019 Jeep Grand Cherokee is usually automatic. However, for specific driving conditions, you can select different modes using the Selec-Terrain Dial located on the center console.
To update the navigation system, visit the official Uconnect website, download the latest map updates onto a USB drive, and follow the instructions provided to install them into your vehicle's system.