Jeep Grand Cherokee 2012 Owner's Manual
![Jeep Grand Cherokee 2012 SUV manual cover](/images/QowGyYxEKSxhMVRpSOXEQfLE/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Next, press the gas pedal three times within ten seconds. Turn the ignition off and then start the engine to verify the reset.
The recommended tire pressure is typically 36 PSI for both front and rear tires. Always check the placard on the driver’s side door jamb for the most accurate information.
To pair your phone, activate Bluetooth on your phone. On the Jeep's Uconnect system, select "Phone" and then "Add Device." Follow the prompts and enter the PIN displayed on the screen into your phone.
The recommended engine oil is 5W-30 for most engines, but always check your owner's manual for the correct specification.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the dust cover, disconnect the power connector, and replace the old bulb with a new one. Ensure it's securely fixed before reassembling.
The check engine light can indicate various issues, such as a loose gas cap, a faulty sensor, or engine problems. It's best to use an OBD-II scanner to retrieve the trouble code or visit a mechanic for a diagnostic.
To reset the Uconnect system, press and hold the volume and tuner knobs simultaneously for about 10 seconds until the screen goes black and resets.
The towing capacity varies depending on the engine type. The 3.6L V6 engine can tow up to 5,000 pounds, while the 5.7L V8 engine can tow up to 7,400 pounds. Refer to the owner's manual for detailed information.
To check the transmission fluid level, ensure the vehicle is on a level surface and warm. Remove the dipstick from the transmission, wipe it clean, reinsert it, and then remove it again to check the level. Add fluid if necessary.
If your Jeep won't start, check the battery connections and charge, ensure the fuel level is adequate, and listen for any unusual sounds. If the problem persists, consult a professional mechanic for further diagnosis.