Jeep Gladiator 2023 Quick Start Guide
![Jeep Gladiator 2023 Truck manual cover](/images/bZHHnOeYAcXauxHXQcraxGhO/thumbs/thumb175x175.webp)
The recommended tire pressure for the 2023 Jeep Gladiator is typically 36 psi for both front and rear tires. However, always refer to the owner’s manual or the tire placard located on the driver's side door jamb for the most accurate information.
To reset the oil change indicator, turn the ignition to the "On" position without starting the engine. Fully depress the accelerator pedal three times within 10 seconds. Turn the ignition off and then start the engine to ensure the indicator has been reset.
The 2023 Jeep Gladiator typically requires SAE 0W-20 full synthetic motor oil. Always check your owner's manual for the recommended oil type and specifications for your specific engine.
To engage four-wheel drive on the 2023 Jeep Gladiator, shift the transfer case lever from 2H (two-wheel drive high) to 4H (four-wheel drive high) while driving at a speed under 55 mph. For 4L (four-wheel drive low), the vehicle needs to be at a stop or moving at a very low speed, with the transmission in Neutral.
The 2023 Jeep Gladiator can tow up to 7,650 pounds when properly equipped. This capacity can vary based on the trim level and the specific configuration of the vehicle. Always refer to the owner's manual for your specific model's towing capacity.
To replace the air filter, open the hood and locate the air filter housing. Unclip or unscrew the housing cover, remove the old air filter, and insert the new one. Ensure the filter is seated correctly and replace the housing cover securely.
If the check engine light illuminates, ensure your gas cap is tightly secured, as this is a common cause. If the light remains on, have the vehicle checked by a professional mechanic to diagnose and resolve any potential issues.
The transmission fluid in a 2023 Jeep Gladiator should be checked regularly and typically changed every 60,000 miles. Consult your owner’s manual for specific maintenance intervals and recommendations.
Yes, the 2023 Jeep Gladiator can be flat towed. To do so safely, ensure the transfer case is in Neutral and the transmission is in Park. Always refer to the owner’s manual for detailed instructions on flat towing your specific model.
To update the Uconnect system, go to the "Settings" menu on the touchscreen, select "System Information," and check for available updates. If an update is available, follow the on-screen prompts to download and install the software. Ensure your vehicle is parked and the engine is running during the update process.