Jeep Compass 2020 Owner's Manual
![Jeep Compass 2020 SUV manual cover](/images/pgqJKPemYWLmSDqAGSdgFgYx/thumbs/thumb175x175.webp)
To reset the oil change light on your Jeep Compass 2020, turn the ignition to the 'ON' position without starting the engine. Press the accelerator pedal slowly three times within 10 seconds. Turn the ignition off and then start the engine to verify the light has been reset.
The recommended engine oil for a Jeep Compass 2020 is SAE 0W-20 full synthetic oil that meets the FCA Material Standard MS-6395.
To improve fuel efficiency, maintain proper tire pressure, use the recommended grade of motor oil, reduce excess weight in the vehicle, and drive at steady speeds. Regular maintenance and timely servicing also play a crucial role in enhancing fuel efficiency.
The recommended tire pressure for the Jeep Compass 2020 is typically 33 PSI for both the front and rear tires. However, always refer to the placard on the driver's side door jamb for exact specifications.
To connect your smartphone to the Uconnect system, enable Bluetooth on your phone, press the 'Phone' button on the Uconnect system, and follow the prompts to pair your device. Select your vehicle in the phone's Bluetooth settings to complete pairing.
Common issues include transmission problems, electrical issues, and engine stalling. Regular maintenance, updating software, and consulting with a certified Jeep technician can help resolve these issues.
It is recommended to inspect the air filter every 12,000 to 15,000 miles and replace it if it appears dirty or clogged to ensure optimal engine performance.
Yes, you can tow with your Jeep Compass 2020. The maximum towing capacity is 2,000 pounds when properly equipped. Always refer to the owner's manual for detailed towing instructions.
To change a flat tire, secure the vehicle on a level surface and apply the parking brake. Use the lug wrench to loosen the lug nuts, lift the vehicle with the jack, remove the lug nuts and the flat tire, and replace it with the spare tire. Tighten the lug nuts in a star pattern.
Regular maintenance checks should include oil and filter changes, brake inspections, tire rotations, checking fluid levels, inspecting belts and hoses, and ensuring the battery is in good condition.