Jeep Compass 2016 Owner's Manual
![Jeep Compass 2016 SUV manual cover](/images/obEFcxYlWGWguOBKZDNwyLEj/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, ensure all tires are inflated to the recommended pressure. Drive the vehicle above 15 mph for at least 20 minutes. The system should reset automatically.
The 2016 Jeep Compass typically requires 5W-20 synthetic motor oil. Always refer to the owner's manual for the most accurate information.
To pair your smartphone, enable Bluetooth on your phone, press the 'Phone' button on the Uconnect system, and follow the prompts to connect. Enter the PIN displayed on your screen if required.
The check engine light can indicate various issues, from a loose gas cap to more serious engine problems. It's advisable to use an OBD-II scanner to check for error codes or visit a professional mechanic for diagnosis.
The air filter should be checked at every oil change and replaced approximately every 15,000 to 30,000 miles, depending on driving conditions. Refer to the owner's manual for specific recommendations.
The 2016 Jeep Compass has a towing capacity of up to 2,000 pounds when properly equipped. Always consult the owner's manual to ensure safe towing practices.
To replace a headlight bulb, open the hood, remove the headlight housing cover behind the bulb, disconnect the electrical connector, remove the old bulb, and install the new bulb. Reconnect the electrical connector and secure the housing.
If the battery keeps dying, check for electrical drains, ensure the battery terminals are clean and tight, and have the battery and alternator tested. Consider replacing the battery if it's old or failing.
To perform a factory reset, go to the Uconnect settings menu, select 'Restore Settings' or 'Factory Reset,' and follow the prompts. Note that this will erase all personal data and settings.
The recommended tire pressure for the 2016 Jeep Compass is usually around 32 PSI for both front and rear tires. Always check the placard on the driver's side door jamb for the exact specifications.