Jeep Compass 2015 Owner's Manual
![Jeep Compass 2015 SUV manual cover](/images/JzKhGpSLwmWUCknSDximCFWk/thumbs/thumb175x175.webp)
To reset the oil change indicator on your 2015 Jeep Compass, turn the ignition switch to the "ON" position without starting the engine. Fully depress the accelerator pedal slowly three times within 10 seconds. Turn the ignition switch back to the "OFF" position. This should reset the indicator.
The 2015 Jeep Compass typically requires 5W-20 engine oil. It's important to use oil that meets the Chrysler MS-6395 specification. Always consult your owner's manual or a professional mechanic to confirm the best oil for your specific vehicle.
To improve fuel efficiency, ensure your tires are properly inflated, perform regular maintenance such as oil and air filter changes, drive at moderate speeds, and avoid excessive idling. Removing excess weight and using cruise control on highways can also help.
If the check engine light comes on, first check for any obvious issues such as a loose gas cap. If the light remains on, have the vehicle scanned for diagnostic trouble codes (DTCs) at an auto parts store or by a mechanic to determine the issue.
To replace the battery in your Jeep Compass key fob, use a small flathead screwdriver to gently pry open the fob. Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side faces up. Reassemble the fob securely.
The 2015 Jeep Compass has a towing capacity of up to 2,000 pounds when properly equipped with the optional towing package. Refer to the owner’s manual for specific towing guidelines and ensure your vehicle is equipped for towing.
It's recommended to check and replace the air filter every 15,000 to 30,000 miles or as needed based on driving conditions. Dusty or harsh environments may require more frequent changes. Consult your owner's manual for specific intervals.
A squealing noise when braking may indicate that your brake pads are worn and need replacing. It could also be caused by dirt or moisture on the pads or rotors. Have your brakes inspected by a professional to determine the exact cause.
To connect your phone via Bluetooth, enable Bluetooth on your phone. Press the "Phone" button on your Jeep’s infotainment system, then follow the prompts to pair a new device. Select your Jeep from the phone's Bluetooth menu, and confirm the pairing code.
If your Jeep Compass won't start, check the battery for charge and connections, ensure the fuel tank isn’t empty, and verify the starter and ignition system are functioning. If these seem fine, consult a mechanic for further diagnostics.