Ideal Vogue System Gen2 S15 User Guide

To reset the boiler, press the 'Reset' button located on the control panel. Hold it for a few seconds until the display resets.
Check the pressure gauge to ensure the boiler pressure is between 1 and 1.5 bar. If the pressure is low, refer to the manual to re-pressurize the system.
Locate the filling loop and slowly open the valves to allow water into the system until the pressure gauge reads between 1 and 1.5 bar. Close the valves afterward.
This could be due to 'kettling,' a result of limescale buildup. Consider flushing the system or calling a professional to descale the boiler.
It is recommended to have your boiler serviced annually by a qualified engineer to ensure optimal performance and safety.
Error code 'F1' indicates low water pressure. Check the pressure gauge and refill the system if necessary.
Yes, you can adjust the temperature settings using the control panel. Refer to the manual for specific instructions on navigating the menu.
Turn off the boiler and the water supply. Contact a professional engineer to inspect and repair the leak.
Use a radiator key to open the bleed valve slightly until air escapes and water starts to drip, then close the valve. Check the boiler pressure afterward.
Possible causes include low pressure, thermostat issues, or a faulty pump. Check these components or consult a professional for diagnosis.