Husqvarna Z 572x 967 669801-00 Parts Manual

Regular maintenance should be performed at specific intervals to ensure optimal performance. Check the oil level before each use, change the oil and filter every 50 hours, inspect the air filter every 25 hours, and replace it if necessary. Sharpen or replace the mower blades every 25 hours, and check the tire pressure regularly.
Uneven cutting can be caused by several factors. First, check if the mower blades are dull or damaged and sharpen or replace them if needed. Ensure that the tire pressures are equal and correct. Also, verify that the mower deck is level and adjust if necessary.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using gasoline with more than 10% ethanol content as it can cause engine damage. Always store fuel in a clean, approved container and use fresh fuel if the mower has been stored for an extended period.
To improve cut quality, ensure that the mower blades are sharp and in good condition. Mow at the proper height for your grass type, and avoid mowing when the grass is wet. Regularly clean the underside of the mower deck to prevent grass buildup.
Before storing the mower, clean the exterior and underside of the mower deck. Change the oil and filter, and stabilize the fuel or drain it completely. Disconnect the battery and store it in a cool, dry place. Cover the mower to protect it from dust and moisture.
To change the blades, first ensure the mower is off and the key is removed. Raise the mower deck to access the blades. Use a wrench to remove the blade bolts, then replace the blades with new ones, making sure they are properly aligned. Tighten the bolts securely.
If the mower won’t start, check the fuel level and ensure fresh fuel is used. Inspect the spark plug for wear or damage and replace if necessary. Check the air filter for clogs and clean or replace it. Ensure the battery is charged and connections are secure.
Adjust the cutting height by using the lever located near the operator’s seat. Move the lever to the desired position to raise or lower the mower deck. Ensure both sides of the deck are at the same height for an even cut.
To clean the mower deck, first ensure the mower is turned off. Use a garden hose to rinse off grass clippings and debris. For stubborn dirt, use a brush or scraper. Avoid using high-pressure water as it can damage the components.
Check the tire pressure using a tire pressure gauge and compare it to the recommended pressure indicated in the user manual. Adjust the pressure as needed using an air compressor or by releasing air. Regularly checking the tire pressure ensures optimal mower performance.