Husqvarna Z 242F 967 665702-00 Parts Manual
![Husqvarna Z 242F 967 665702-00 Lawn Mower manual cover](/images/qLRzscEqJQxihboXEiabcSxt/thumbs/thumb175x175.webp)
To start the Husqvarna Z 242F, ensure the parking brake is engaged, the PTO switch is off, and the throttle is set to choke if the engine is cold. Turn the ignition key to the start position and release it once the engine starts.
If the mower won't start, check the fuel level and quality, ensure the battery is charged, and inspect the spark plug for wear or damage. Also, verify that all safety switches are engaged.
To change the blades, first ensure the mower is off and the spark plug is disconnected. Lift the mower deck and secure it. Use a wrench to remove the blade bolts, then replace the old blades with new ones, ensuring they're installed correctly.
Regular maintenance includes checking and changing the oil, replacing the air filter, inspecting and sharpening blades, checking tire pressure, and cleaning the mower deck. Refer to the owner's manual for detailed schedules.
To adjust the cutting height on the Husqvarna Z 242F, use the deck lift lever located on the right side of the mower. Move the lever to your desired cutting height position.
The Husqvarna Z 242F typically requires SAE 30 oil for temperatures above 40°F (4°C) and 10W-30 for varying temperature ranges. Always check the owner's manual for specific recommendations.
For uneven cutting, check that the tire pressure is equal on all sides, the blades are sharp and properly installed, and the mower deck is level. Adjust as needed following the manual instructions.
After ensuring the mower is off and the spark plug is disconnected, use a garden hose to rinse off grass clippings and debris. For thorough cleaning, scrape off stuck grass with a plastic scraper.
Excessive vibration can be caused by unbalanced blades, loose components, or debris caught in the mower deck. Inspect these areas and tighten or clean as necessary.
To store the mower, clean it thoroughly, drain the fuel or add a fuel stabilizer, change the oil, and disconnect the battery. Store in a dry, sheltered location. Cover the mower to protect it from dust and debris.