Husqvarna LP 9505 Light Compaction Parts Manual
![Husqvarna LP 9505 Light Compaction Compactor manual cover](/images/NeQtjvvRynjMdrWLIQzloEXl/thumbs/thumb175x175.webp)
Ensure the fuel tank is filled, the engine oil level is adequate, and the throttle is set to idle. Pull the starter cord gently until resistance is felt, then pull it briskly to start the engine.
Regular maintenance includes checking the engine oil level, inspecting the air filter, tightening bolts and nuts, and ensuring the compactor plate is clean. Change the engine oil and clean the air filter according to the user manual schedule.
Check for any loose parts or bolts on the compactor. Inspect the vibration-dampening mounts for wear and replace them if necessary. Ensure the engine is running smoothly without misfires.
Check the fuel level and ensure the fuel valve is open. Inspect the spark plug for fouling and clean or replace it if needed. Verify that the air filter is clean and not clogged.
Wear appropriate personal protective equipment such as ear protection, safety goggles, and gloves. Ensure the work area is clear of obstacles and other hazards. Follow all safety instructions in the user manual.
Turn off the engine and allow it to cool before transport. Secure the compactor on a stable surface using straps or chains to prevent movement. Ensure the fuel valve is closed to avoid leaks.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using fuel with high ethanol content to prevent engine damage.
Refer to the user manual to locate the throttle adjustment screw. Adjust the screw to achieve the desired engine speed, ensuring it does not exceed the recommended RPM.
Check the plate for any damage or excessive wear. Ensure the engine is running at the correct speed and that the exciter is functioning properly. Clean the plate to remove any debris.
Change the engine oil after the first 20 hours of operation, then every 100 hours of operation or annually, whichever comes first. Always use the oil type recommended in the user manual.