Husqvarna J50 96111001302 Parts Manual
![Husqvarna J50 96111001302 Lawn Mower manual cover](/images/rOOwSEcAQgyBongjHBGkIbBN/thumbs/thumb175x175.webp)
Ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Pull the starter rope while holding the safety lever against the handle.
Use SAE 30 oil for general use; SAE 5W-30 is recommended for cold temperatures. Always check the user manual for specific recommendations.
Check for fuel and oil levels, inspect the spark plug for corrosion, and ensure the air filter is clean. Also, verify the primer bulb is functioning.
Blades should be sharpened at least once per mowing season or whenever you notice the grass is being torn rather than cut cleanly.
Drain the fuel tank, change the oil, clean the mower deck, check the spark plug, and store the mower in a dry place.
Use the height adjustment lever located near each wheel to set your desired cutting height. Adjust all four wheels to the same height for an even cut.
Check for debris or damage to the blade, ensure the blade is balanced, and inspect for loose parts or bolts. Tighten and clean as necessary.
Regular maintenance such as changing the oil, replacing the air filter, and keeping the blades sharp can improve fuel efficiency.
Always wear protective gear, clear the lawn of debris, never refuel while the engine is hot, and ensure children and pets are at a safe distance.
Disconnect the spark plug, tilt the mower carefully, and use a hose to remove grass clippings and debris. Avoid directing water towards the engine.