Husqvarna GTH2548 960230003 Parts Manual

To start the Husqvarna GTH2548 lawn mower, ensure the parking brake is engaged, the blades are disengaged, and the throttle is set to the choke position. Turn the ignition key to the start position and release once the engine starts.
Use a high-quality SAE 30 oil for temperatures above 32°F (0°C). For temperatures below 32°F (0°C), use SAE 5W-30 synthetic oil. Always check the oil level before each use.
If the mower won't start, check the battery connections, ensure the fuel tank has fresh gasoline, and inspect the spark plug for wear or damage. Also, verify that the safety switches are engaged.
Sharpen the mower blades every 25 hours of use or at least once per mowing season to ensure a clean cut and promote lawn health.
The recommended tire pressure for the front tires is 14 PSI and for the rear tires is 10 PSI. Regularly check and adjust the tire pressure to ensure optimal performance.
To change the air filter, remove the air filter cover, take out the old filter, and replace it with a new one. Ensure the new filter is properly seated before replacing the cover.
Excessive vibration can be caused by unbalanced blades or loose parts. Check the blades for damage and ensure all bolts and screws are tightened. If the problem persists, consult a professional technician.
To clean the cutting deck, first ensure the mower is off and the spark plug is disconnected. Use a hose to remove grass clippings and debris, and scrape off any stuck material with a brush or plastic scraper.
To improve cutting performance, regularly sharpen the blades, ensure the deck is clean, and adjust the cutting height according to the grass condition. Also, mow when the grass is dry.
At the end of the mowing season, perform an oil change, clean or replace the air filter, sharpen the blades, drain the fuel, and store the mower in a dry location. Consider a professional tune-up for optimal off-season care.