Husqvarna Automower Automower House Instruction Manual
![Husqvarna Automower Automower House Lawn Mower manual cover](/images/EeMSNWeWwBCfUYLdNOtMPDBs/thumbs/thumb175x175.webp)
To install the Husqvarna Automower House, place it over the charging station ensuring it's aligned correctly. Secure it to the ground using the provided pegs or screws, depending on your lawn type.
Check the guide wire installation and ensure there are no obstacles blocking the mower's path. Verify that the charging station is powered and the guide wire signal is active.
Regularly inspect the blades for wear and replace them every 1-3 months depending on usage. Clean any grass clippings stuck to the blades to prevent rust and ensure efficient cutting.
Ensure the boundary wire is properly installed and the lawn surface is even. Check if the mower's cutting height is set too high and adjust accordingly.
Connect the Automower to a computer using a USB cable and use the Husqvarna Automower Connect app to download and install any available updates.
Yes, the Husqvarna Automower is designed to operate in wet conditions, but it is recommended to avoid mowing during heavy rain to prevent damage and ensure safety.
Clean the mower thoroughly, charge the battery, and store it in a dry, frost-free location. Disconnect the charging station from the mains and protect the boundary wires.
Regularly clean the mower and ensure the charging station is in a shaded area to avoid overheating. Use the eco mode if available and avoid overcharging the battery.
Inspect the mower for debris stuck in the blades or wheels. Check for loose parts and tighten them if necessary. If the noise persists, contact a service center.
Open the hatch on top of the mower and turn the height adjustment knob to the desired position. Refer to the user manual for specific settings for different grass types.